Engine cover underneath car

Space-Black

Active Member
Jun 16, 2008
84
0
Northants
I've got a piece of plastic hanging down underneath my car; on my petrol car this wasn't there, but this is a newer model (04) and a TDi. I've had a look thinking something had dropped, and sure enough, a bolt had fallen out at one side at the front of the car. Got my dad to fix it but the back of it is still hanging quite low; when you push it though it feels secure. It just looks too low but because I've only had the car a month or so I can't remember if it was hanging that low when I got it. Anybody got the same?
 

Willie

LCR Track car
Aug 6, 2004
8,939
1
Sunny Scotland
There should be a plastic under tray below the engine compartment, best off removing this and see if there is any damage or missing screws
 

Space-Black

Active Member
Jun 16, 2008
84
0
Northants
Hmm OK thanks not a bad idea. I'm not overly worried ATM because it's not hitting the floor or speed bumps but I don't want it to get to that state.
 

Willie

LCR Track car
Aug 6, 2004
8,939
1
Sunny Scotland
Its an expensive piece of plastic, if it smashes its expensive to replace, if it falls off and hits someone you be in deep ****!!
 

dainott2105

mk1 Cupra and mk2 FR TDI
Nov 4, 2006
685
0
swansea
I thought that the middle plastic tray on these was cheap enough. Its the exact same on on a golf mk4. Sure they are about £35. Its missing on my car and just havent got around to getting one yet (forgotten all about it TBH)!
 

andycupra

status subject to change
under-tray on leon cupra and cupra R are about £100!

over time, and via servicing the attachments get damaged or reduce in number...
They can also get damaged by speed bumps etc.

Definately worth taking time to get it attached correctly.
 

Space-Black

Active Member
Jun 16, 2008
84
0
Northants
See, I'm not sure if it is or not. It low...but not unstable - now my dad put the bolt back in its secure enough. It doesn't hit anything; it's not scuffed on the underside. I just think it looks too low.
 
Lecatona HPFP (High-pressure Fuel Pump Upgrades)