fmic pipe kit

[skinz]

When I brought my cupra it had a fmic fitted but no pipe work for it, where is the best place to get it from, are the 1s of ebay any good, I have seen something about needing another bit of pipe for I think the maf, I have a 02 1.8t with stage 2 cheers

 

[ReDBull]

What size pipe work do you need and what type of FMIC have you got?

 

[skinz]

its 2.5" pipe work, dont know what make the intercooler is

 

[d1n93r]

what type of kit is it? one on each side or both on the same side?

 

[skinz]

1 on each side

 

[Mr OCD]

1 on each side

I'd bin that and start again.

 

[ReDBull]

I'd keep it the single pass coolers are better. So it's 63 mm in let out lets?
I did a fitting guild http://www.seatcupra.net/forums/showthread.php?t=363310. If you look at the bottom there is a link to fitting these on K03 framed cars. There is links to the pipe work you'll need.

 

[skinz]

Cheers for that, the thing I'm still not sure about is I've seen some set ups with a sensor in the pipes and some with out, has mine got this sensor, what is the sensor cheers

 

[nd-photo.nl]

MAP (manifold absolute pressure) sensor and it's necessary.

 

[skinz]

Sweet cheers for that, where can I get the pipe to fit the sensor

 

[nd-photo.nl]

Get a custom one made or/and I believe Forge made one as well.

 

[skinz]

Can any1 sort me a link out 4 the pipe in need for this sensor plz I can't seem to find

 

[nd-photo.nl]

Lol did you even try ? Went to the website of Forge and used "map" as search term.

http://forgemotorsport.com/content.asp?inc=product&cat=&product=FMMAPT

 

[skinz]

Yea did try, I put in intercooler pipes and map pipe couldn't find it, I did find it the first time u told me about looking for forge 1 but then I look again yesterday and couldn't find it again

 

[skinz]

That's on the American sit I was looking on the UK 1

 

[skinz]

Nice 1 cheers for the link, if I click the the UK flag it comes up, cheers for that bud

 

[nd-photo.nl]

No prob, good luck!

 

[skinz]

I just looked at a complete intercooler set up and there was another section of pipe that had 2 little bits of pipe sticking out, 1 smaller than the other, what are these for

 

[nd-photo.nl]

That one connects to the outlet of the turbo.

-Small connection: hose for N75 valve
-Big connection: diverter/dump valve to Turbo intake pipe

 

[skinz]

Guess I need 1 of them as well, do I get that from forge