Holdup's 05 LCR RR - Revo Stage 2, Quaife LSD to fit!

Holdup

Active Member
Aug 28, 2009
313
23
Kent
After owning a 03 Leon 1.6 s for a year and a half and selling my ZX6R due to lack of use i decided to treat myself to an LCR :D

My old Leon

dscf1868a.jpg


My old ZX6R, I miss her :cry:

img0152kt.jpg


and my LCR the day I put the deposit down

IMG_0303.jpg


Completely standard, 2 owners from new, one of them being Seat UK but that was only for 6 months and then the next owner owned it since. Picked the car up at the beginning of May and been enjoying it since.

The first mod was a Skoda Fabia rear wiper, which i fitted then went to test and found there was no washer fluid being squirted... opened the boot and loads of water poured out, so removed the plastic cover to find the hose had come off the motor...

Mods:

Exterior:
Anthracite LCR wheels
Golf aero front wipers arms and blades
Fabia rear wiper
Golf clear side repeaters (still to fit)
4300k Hids
LED side lights
Silver front and rear indicator bulbs
LED reverse light bulbs
Civic Type R aerial

Handling / braking:
S3 strut brace
Goodridge braided lines
Dot 4 blue racing fluid
Brembo front discs and pads
OEM spec aftermarket rear discs and pads
Weitec Hicon GT coilovers
Forge 11mm front spacers and 16mm rear spacers
Hughes engineering rear strut brace
Neuspeed 28mm rear ARB
Quaife LSD (to fit)
28mm front ARB (to fit)

Interior:
LED bulbs
Full set of Recaro Seats
Nomad single pod pillar with Auto gauge boost gauage
LED strips in front foot-wells

Engine:
Pipercross filter with jabbasport heatshield
Cobra non res cat back exhaust
N249 bypassed
Forge 008
Red SFS 3" tip
Revo stage 2 map
ECS tuning red coil packs and adapter plate
Forge front to back quickshifter
42 draft shifter bushes
Creation Motorsports n75 and DV hoses
SFS upper boost hoses
Airtec FMIC
4 bar fpr
 
Last edited:

Holdup

Active Member
Aug 28, 2009
313
23
Kent
Thank you

Yes I have plenty of plans for it, still got a few things to add to the thread, just started it as it was because I wrote out nearly my whole first post and then closed the tab it was in [:@]
 

Holdup

Active Member
Aug 28, 2009
313
23
Kent
Next up was 35w 4300k Hids and LED sidelights but no photos of them yet.

Then i sent my car off to Inspraytion in Rochester to have my wheels repaired and powder coated in anthracite :D at £50 a wheel I couldn't argue plus my brother had his wheels done by them and I was impressed.

*photo to follow*
 

Holdup

Active Member
Aug 28, 2009
313
23
Kent
Id miss that bike too

I spent a lot of money on that bike *sighs*

Anyway, anthracite wheels:

DSC_1075.jpg


With new centre caps and wheel nut caps

IMG_0370.jpg


Next to be fitted was a JR filter and a heat shield i got off ebay, excuse the night time phone camera quality.

IMG_0380.jpg


Then it was off to jonjay for some detailing :D

http://www.seatcupra.net/forums/showthread.php?t=360893

I also had braided hoses fitted along with dot 5.1 fluid

The mods stopped for a while but then they came in the form of some silver indicator bulbs and ring xenon max bulbs for the high beam and fogs

and on Friday this turned up :D:D

IMG_03661.jpg


Cobra non resonated cat back, but I've got to wait to fit it as it doesn't come with a gasket where the cat and centre section meet... so I have one on order along with a new splitter :p
 
Last edited:

Ben:

Active Member
Jun 5, 2012
68
0
Norwich
Looking good! Interested to see what you think about the cobra, as I'm tempted for one aswell.
New centre caps look good :)
 

Holdup

Active Member
Aug 28, 2009
313
23
Kent
Thanks, cant wait to get it fitted, as soon as the gasket turns up I will be pestering my brother constantly until he fits it :p
 

Holdup

Active Member
Aug 28, 2009
313
23
Kent
They're good down there, I deliver to them quite a lot, they did me a good deal on my Avon ZZ3's fitted to the rear.

Hopefully it will be fitted Thursday

Was you at Aylesford retail park earlier today?
 
Last edited:

Holdup

Active Member
Aug 28, 2009
313
23
Kent
I was just pulling in off the london road, was in the work van though. I like your wheels

Done the n249 bypass earlier today, not sure if i can feel a difference or not
 
Last edited:

Holdup

Active Member
Aug 28, 2009
313
23
Kent
What are the brembos like seen them on ebay , do you ever go to Prept at Brand hatch

Yea they are good, haven't got any complaints about them. No ive never been, tbh i dont know what it is :rofl:

DS2500 are very good but a bit pricey :?

Nice car Holdup, cant beat a silver LCR ;)

Thats what made me go with the Brembo's, think I paid something like £50 for them.

Thanks, I keep reading through your thread, I'm going to attempt to read it all, was hoping to see your car down at AMD on the RR day but I couldn't make it in the end :(
 
SEATCUPRA.NET Forum merchandise