Aug 29, 2010
587
0
suffolk
Hi another post

i always thought my cupra r had a ko3s but i searched on here and actually looked at it and i have a ko3 but i'm happy with the power at the minute i'm sure i'll want more :)
i already have -

Jetex Filter
Forge T.I.P
Baby Ko3 lol
n249 Bypass
Blueflame Cat Back
P Torque Map

just to confirm what i need to go to ko3s

Ko3s Turbo
Intercooler
Downpipe & sports cat (200 cell) or race cat (100cell)
a map will more than likely go to AMD and get the map done as it's closest place to me with best reviews

Thanks
 
To go to K03s all you really NEED is the turbo and map.

To get the most out of it you will want an intercooler, downpipe, manifold if you want to go that far. I would have an intercooler on the set-up you have at the moment anyway.

If I were you I would put an intercooler on first before you think of the turbo. Then when you have the money for a turbo, downpipe and map do that all at the same time (as the downpipe needs to come off for the turbo anyway).

Bear in mind you also may need to change the fuel pump depending on its condition. I would also keep money back for coilpacks and a MAF as these are common to go after going for more power.
 
Intercooler is next on my list has been for a while was going to use ebay ibiza kit as it can handle up to 300hp don't think i'll be taking mine over that lol, yeah i been told about that apprently the bolt down coilpacks are more stronger iv'e heard so i need to check my pins etc and for the price of a fuel pump i may aswell do it. i'll keep you posted.

Thanks for a fast reply and i'm liking the car btw and the spec :p
 
Yeah the ebay kit will do for stage 2. The bolt down coilpacks are the way to go. They are the same price and you don't have to worry about them popping out all the time. What engine code are you? Just to make sure you have the bolt holes for them on your rocker cover.

You can pick up a second hand LCR pump for around £50. That's what I would be going for if I were you.


Cheers for the comment on the car. It's getting there, hopefully it will be fully complete soon!
 
its AYP, Yeah it's got the diagonal holes next to the coilpacks so i assume i can just make sure i get the correct ones lol. i'll try and by bits and bobs from now until i get the turbo but intercooler will go on as on when i get it :) thanks for your help

by the look of your sig yours has had alot of work