K04 MK3 Ibiza Cupra Track Ready - RIP

[Chambers_CUPRA]

Plugs into the OEM plug save cutting and bodging. Feels quality bit of kit

 

[yellonvi-R]

Yeah suppose it looks neater. Think ill message him on facebook

 

[Chambers_CUPRA]

Ordered a dump valve service kit from Forge Motorsport today. Also spoke to them about my actuator and how to set it up. They said to undo both nuts, close the waste gate arm, nip the outside nut up, mark it, tighten it 3 times (adding the 3 turns of preload) then finally tight the inside nut up.

Pics

Undo both nuts

Tightened and marked

Added the 3 turns preload and done the other nut up

I finially have a set date for a remap after being messed about by Revo, Rtechhh and another mapper.

 

[Ginge81990]

Looking good bud. Who's mapping it now then?

Sean's Xperia arc

 

[Chambers_CUPRA]

Looking good bud. Who's mapping it now then?

Sean's Xperia arc

 

[Chambers_CUPRA]

Again

Haha

 

[Chambers_CUPRA]

 

[Chambers_CUPRA]

Few bits done this weekend

New centre caps finish the wheels off

Covered my gear cables with 11mm blue SFS hose

Painted my shifter box again. Hammerite hammered black.

Other news. Ive finially got my dipstick tube out of my spare block. I can now clean it and decide on what pistons and rods i want.

And hopefully have a parcel tomoz which ive been waiting an age for

 

[NRM 90]

Smart job bud

 

[Chambers_CUPRA]

Smart job bud

Thanks mucka

 

[Chambers_CUPRA]

 

[Chambers_CUPRA]

Finially got my SFS coolant hoses today

Main Rad set

expantion tank set

And both together

All free which was nice

 

[hixonseatboy]

Looks a nice kit. You lucky buger

Sent from my GT-I9305 using Tapatalk 2

 

[Ginge81990]

When are you planning on fitting them? look ace btw

 

[Chambers_CUPRA]

When are you planning on fitting them? look ace btw

Started it last night mucka should finish it tonight

 

[Chambers_CUPRA]

More bits to help mapping

 

[Chambers_CUPRA]

More goodies = more work

 

[Chambers_CUPRA]

And coolant blanks for the OEM oil cooler pipes

 

[Chambers_CUPRA]

Few recent pics

Few grafting pics.

All the SFS coolant hose are on and fit a right treat

Heater matrix pipes

Secondary water pump and thermostat to bottom of rad

New coolant tank

R8 rad cap

Rest of the hoses. (Will get better pics tomoz with the DSLR)

Whipped the brakes off

New vs old rotor

Glad to get these off

Finish it off tomoz hopefully

 

[Tomer 20VT]

your C pillar bar , what other cars does it fit? where did you get it from?

10x