The rear splitter should fit all FR/Cupra rear bumpers i would have thought. Looking at the pics from the first page the splitter appears to just be an insert around the bumper onto the black plastic moulding 
-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
K1 Splitter - Performance VW
- Thread starter Jace
- Start date
-
- Tags
- performance splitter
oh so they are gonna use the r32 style so now we should have another type of exhaust at seat sport... well i like a lot the ones from apr and eurojet so now i can use them, i wrote ibex parts about this just waiting for response...
igor the heatshield is a pain to put or at least that was the issue i had lol
igor the heatshield is a pain to put or at least that was the issue i had lol
Reply from Ibex:
Dear Sir
This part is not available right now
Probably in one or two months
IBEXPARTS
VIGO SPAIN
The rear engine cover mounting studs seemed to be superglued in, ended up destroying the plastic and unscrewing with a 10mm socket, used the front ones to secure it...
hello guys,
some bad news have come up...
It seems that there have been a problem with the first production run, meaning that the tooling for front spoiler have caused an molding fault = the whole production have been scrapped... Now we have to wait another month before the kit will be released...
some bad news have come up...
It seems that there have been a problem with the first production run, meaning that the tooling for front spoiler have caused an molding fault = the whole production have been scrapped... Now we have to wait another month before the kit will be released...
I used to work as an injection moulder, and this sort of thing can happen when the wrong mix of recycled/new plastic is used, too much gas produced causing holes/poor mould flow...
hello guys,
some bad news have come up...
It seems that there have been a problem with the first production run, meaning that the tooling for front spoiler have caused an molding fault = the whole production have been scrapped... Now we have to wait another month before the kit will be released...
Sounds like poor design of the tooling.
Something like that could suffer from serious bowing when it cools.
Most tooling is made is China these days. But it's never 100% perfect. Something always needs working on. It could be that the tooling wasn't completely checked to the drawings before it was put into probuction.
Is it made from ABS/PC ?
Last edited:
no it seems that is gold what is made of and you will have to sell your first child for it.... like 400 euros the front splitter and like 1200 the whole kit
jonnysmith199
Guest
Any news yet???
I found this looks a little similar
http://66.163.168.225/babelfish/tra...ryZ40202QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I found this looks a little similar
http://66.163.168.225/babelfish/tra...ryZ40202QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Last edited:
I would guess that is the spoiler from the kit
edit: no it's not!!!!!!!! The spoiler from the kit is bonded across the middle and would only fit an FR/Cupra front bumper
edit: no it's not!!!!!!!! The spoiler from the kit is bonded across the middle and would only fit an FR/Cupra front bumper
Shame it's such a crap copy. Although it does have the benefit of having a aerial built into the design.
Similar threads
