Progressive Parts, performance parts and tuning specialists

Lend me your voices :)

andy_lang

andy_lang

Feb 28, 2010
1,367
1
Southampton
http://s1009.photobucket.com/albums/..._4245379_n.jpg
http://s1009.photobucket.com/albums/..._6884975_n.jpg
http://s1009.photobucket.com/albums/...0_472035_n.jpg
http://s1009.photobucket.com/albums/..._4161234_n.jpg
http://s1009.photobucket.com/albums/..._6306158_n.jpg

Just needs tidying up - but OMG WOW!!! fmic intake temp has dropped from 25 to 6 degrees, and power 210bhp to 255 on the Revo2!!!! WOOP WOOP thats even before the maps been tweeked - heellll yerr and she pulls like a train!

But now................ Do I put the tin plate on the front again or get it all smoothed off, and mesh - leave off or fashion the standard grills in the bottom?

Splitter to go on this wknd!

:D
 
..._4245379_n.jpg

..._6884975_n.jpg

...0_472035_n.jpg

..._4161234_n.jpg

..._6306158_n.jpg
 
andy_lang said:
http://s1009.photobucket.com/albums/..._4245379_n.jpg
http://s1009.photobucket.com/albums/..._6884975_n.jpg
http://s1009.photobucket.com/albums/...0_472035_n.jpg
http://s1009.photobucket.com/albums/..._4161234_n.jpg
http://s1009.photobucket.com/albums/..._6306158_n.jpg

Just needs tidying up - but OMG WOW!!! fmic intake temp has dropped from 25 to 6 degrees, and power 210bhp to 255 on the Revo2!!!! WOOP WOOP thats even before the maps been tweeked - heellll yerr and she pulls like a train!

But now................ Do I put the tin plate on the front again or get it all smoothed off, and mesh - leave off or fashion the standard grills in the bottom?

Splitter to go on this wknd!

:D
Click to expand...

URL's are not formed corrected they've got "...'s" in them.
Need to repost the proper URL's
 
Yer think ill do the standard grills - dont spose anyone knows the part numbers for the lower sections, I can live with the slatted top grill for the moment.
May put a vinyl number plate up on the windscreen, or tinny on the dash................. think number plates sit a tad high on these bumpers.

Only main issue is the ram air feed - prob out the fog light hole.

Brake duckting - ill make some custom ducts to feed all the air from the thin sliver of a gap along the bottom, not quite what I was after but ill do the maths later. Im sure at speed itll scoop "enough" air to at least help the brakes! lol!
 
Yer I dont like the plate in the window - plus it rattles around! Just there for PC plod at the mo! cough!

Oiii Ape - less of the tart calling you mook! But thanks lads - think ill pop standard grills in, and tinny plate back in the middle. Splitter with its color coded corners goes on this wknd! :D
 
Andy, that IS looking good mate. wish i hadnt sold it now :cry:

put the OM grills on to finish the job off, b careful when putting the splitter on, use some bubble wrap when fitting it on to stop scuffs/scrapes but before you fully tighten the screws remove the bubble wrap.

Adam posted these part numbers on another thread:

1M0 853 653 G 79Y Grille

1M6 853 915 B41 Cover

1M0 853 668 F 79Y Grille

1M6 853 665 B 79Y Cover for Fog Left

1M6 853 666 B 79Y Cover for Fog Right

1M0 853 651 J 79Y Centre Grille

The ones in BOLD are the ones you deffo need but I'm not sure of the lower middle one, I'm sure the dealers/TPS will tell you.
 
Cheers lads, much appreciated! had the car for a year - done SO MUCH to it for track use and still yet to compile it all together in a readers ride! lol even just to save my own sanity of loosing track of what ive done!

Yup I got that Sal - thanks mate, I just need some kind fellow to confirm which is the lower centre grill. Im going to squeeze it up a lil higher to be a bit above the top of the crash bar, this will allow the bottom of the radiator enclosure to be lower than the core - I hope!! I still cant believe its twice the size of the Toyo core! :D and LOVE the pops from the exhaust!

I fitted a splitter to my previous bumper, all in hand ;) jus gota make sure i dont drill thru the core! LOL!!
Gona try and squeeze it into JKM next fri for a RR tunning session!

Yer LCR - BAH! who needs a big lag slow spooling turbo and 280 bhp when a stripped out fast spooling 255bhp whippet comes tanking up ya chuff......... Ape, Ape - GAME ON!!! :D muwahahahaha!
 
You must log in or register to reply here.
Progressive Parts, performance parts and tuning specialists
Top Bottom
Back