looking for a dyno PD150, R783 injectors, 2260 turbo

[tothemax1]

I am looking for a dyno for a car w/

PD150
R783 injectors
2260 turbo
water meth


Does anybody know if one is posted on the site?

 

[jonjay]

There are multiple companies all around the UK with dyno's....where abouts are you based?

 

[volvic]

He's over in california, i think he's after a dyno print out of a car with the above mods to see what it made.

i'm sure a few members may have a similar setup (not exact) but close enough...

 

[jonjay]

Not sure of anyone who has a VNT22 turbo on here...

 

[brad1]

Does'nt devonutopia have a similar spec ?

 

[jonjay]

He has allards VT5...not sure if thats a VNT20 or 22

 

[brad1]

He has allards VT5...not sure if thats a VNT20 or 22

I knew he wasnt runnnig a pd150 hybrid, i knew it was an allards VT? something lol, but didnt know if it was a vnt20/22 etc

 

[tothemax1]

Sorry for the confusion. I wanted to look at a Dyno graph of someone who tested a similar set up. I am looking a possibly building a car like this.

P

There are multiple companies all around the UK with dyno's....where abouts are you based?

 

[devonutopia]

Well, I have no idea what my turbo technically is, but I do have R783 nozzles and a PD130 is the same more or less as a 150 once you add FMIC etc. My latest dyno is below, done last year though: The power curve is about right but for some reason torque follows bhp too closely so I think it is wrong. have done 370 lb/ft at same bhp before. I can't remember if this was before the W/M install though.

 

[tothemax1]

Thx Partner,

This is exactly what I was looking for... these are some nice numbers!!

Does she smoke a lot on everyday driving?

 

[devonutopia]

Does she smoke a lot on everyday driving?

Nahhh, not much! The below was on a hot day and was being asked to gain speed FAST but she is normally not too bad....

This is more like what she is like on a trackday, now with side exit exhaust.

 

[tothemax1]

Tnx,

That's not bad at all. Better than my ALH w/ PP502's.

BTW, wh t kind of cam do you have in there?

 

[devonutopia]

Entirely stock top-end components, but the head has been fettled a little bit in the porting department.

 

[devonmikeyboy]

You didn`t have water/meth fitted at the Alan Jeffery dyno day Jason.