injectors

I have a BMN leon FR thats being a problematic menace! So for over a year i have had issues with hard start that i have been consistently chasing replacing glowplugs, batterys, injectors, tandem pump, looms, servicing, torsion and timing to little or no difference each time. i have had...

Suggest injector nozzels or full kit with SERIAL NR / OEM NR for lookup. Stage 1 is done for stock / EGR Delete. Have 96 kw turbo, not installed! Have fmic intercooler, not installed ! Did research only for nozzels link from myturbodisel.com forum post. "DSLA 150P P502" .216 OEM Nozzels...

Hello, I have a little problem with my Cupra BWJ. I recognized that the car have a small missfire on idling and I have really no idea what can be wrong. I moved all ignition coils and spark plugs and still missfire on same cylinders. Just cylinder 2 is without any missfire. The most counting...

Hello all, so my little project is coming along nicely, there’s been some hiccups but we’ve gone from taxi to slightly faster taxi in just a couple of months. the next step is to swap out the baby alh90 turbo with one out of a pd150 (I’ve read a few guides on the turbo upgrade so we should be...

Hello there wondering if anyone can help me, I have a Seat Leon 1.4 TSI and I have been having performance problems for example when driving up hill it looses power and the car jerks, I have taken it to a mechanic once and said my Cam shaft position sensor is faulty, so I have replaced that, but...

Hi guys I posted this earlier but think it was in the wrong place. 2008 leon fr tdi 2.0 170bhp Using a lot of oil (1 litre every 300 miles average) blue smoke pumping out of the back of it lazy start up, lumpy idle and no power now at all. Started about 3 months ago blue smoke coming out of...

Hi all new to the forums so apologise if this has already been asked, changing my standard pd105 injectors to a pd130 set, but im having trouble trying to find the torque settings, if anyone could point me in the right direction it would be greatly appreciated, Thanks.

Hi there, ill start at the beging: The cars a 2003 Toledo 110 TDI (ASV engine code) Its got, a green panel filter, the EGR blocked off and a high flowing de-cat, its got a tuning box (not the resistor in a box one but the one that works) Buut the turbo is on its way out :( Im trying to...

hi guys i have a 2001 1.6 leon i am in the prosses of sorting out ruff running i have error code of injectors 1 and 3 speradic. has any one been here befor? whats the best thing to do next or how much are injectors. chears

Im getting my turbo upgraded next week to a hybrid by turbo dynamics. I am also getting a sachs clutch. I been told to expect around 215 to 220hp but if I get bigger injectors then can expect more. I have the 2.0tdi pd. I was told to use the 170 version injectors as my 140s aint good enough...

hello my injectors seem to be abit tappety? why is this? what should i do? thanks

Basically looking at my options on my stage 2 Revo K03S Ibiza Cupra and what I can do to achieve the best performance on that set-up, will I see any worthy gains from fitting a 225 LCR fuel pump and injectors over the standard items? I already have the stage 2 map, Jetex cone filter extended...

Hi all, I have been trying to get the Cupra over the 200bhp mark. She's been remapped by JBS on a generic stage 1, got a CDA induction kit and a Baileys Diverter Valve. She's done around 91k, and I'm thinking to basically give her a full service. Plugs, coil packs, oil, but I'm...

Have been reading around the net and come across alot of contradictory information so hoping someone here can set me right: I have an AUQ engine and so have ev12 injectors? If so would TT Quattro injectors (Bosch 0280155892) drop straight in? (Last one) Will 380cc injectors handle 320hp...

Hi guys, tried to search forgive me if its in here, but i can find it nor on tdi club. Is there a procedure for checking the health of your injectors on an ASZ PD130 with vag com... many thanks, Scott

Spoke to a reliable source there just now with dealer ETKA and got the following information We are assuming that based on the 240bhp posted in the 2010 ETKA, that the BWJ engine has been replaced by the CDLD. No access to previous version of ETKA means that it is possible that moving...

http://cgi.ebay.com/ebaymotors/VW-TDI-Injector-Nozzles-Diesel-Nozzle-Golf-Jetta-.205-_W0QQitemZ390079321297QQcmdZViewItemQQimsxZ20090808?IMSfp=TL0908081310007r26820 Saw a few people on clubtgi.com used these and they all had positive reviews. Would I best trying to find someone with...

ok just had them fitted. oh man the cars running like a dog. tick over is ok and running fine (apart from somtimes alot of smoke) off boost runs fine. nail it and well, it feels like only 2 cylinders are working!! this normal? hope map sorts it.

Hi guys, Im upgrading to a hybrid turbo and was wondering what injectors are best to use with this upgrade? thanks, Paul.

For my setup with ihi vf36 (300-400hp) I wanted to get genesis 550cc, but i figured out they won't fit on a AGU (big port) engine. So now is my question: is it possible to make them fit with adaptars or something? And if not what would be the best choice of injectors then?