adsbluecupra Active Member Oct 28, 2008 69 1 st stephens cornwall Jan 11, 2009 #1 does any one have a guide to fitting a mbc got it mounted in car pipes just need connecting up any help appreciated
does any one have a guide to fitting a mbc got it mounted in car pipes just need connecting up any help appreciated
DaNnY_LaD Big Turbo Leon Cupra R Jun 2, 2007 4,814 1 Manchester,Walkden www.myspace.com Jan 11, 2009 #2 One to Actutator One to charge pipe Blank of hose going to Tip(bolt) Leave N75 Electrically Plugged in... Then tune it in 3rd or 4th start from - low and work your way up + (Remeber When in these gears Wide Open Throttle Is required E.g Foot right Down) From 1.5krpm to the limiter then slightly adjust it and being carefull to keep an eye on your boost gauge to not exceed turbo/Map Boost Requirment One Full 360Degree turn at a time to get were you need it then slight adjustment to get it Spot on.... Then enjoy Last edited: Jan 11, 2009
One to Actutator One to charge pipe Blank of hose going to Tip(bolt) Leave N75 Electrically Plugged in... Then tune it in 3rd or 4th start from - low and work your way up + (Remeber When in these gears Wide Open Throttle Is required E.g Foot right Down) From 1.5krpm to the limiter then slightly adjust it and being carefull to keep an eye on your boost gauge to not exceed turbo/Map Boost Requirment One Full 360Degree turn at a time to get were you need it then slight adjustment to get it Spot on.... Then enjoy