• Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

Leonfrdiesel184

Active Member
Apr 18, 2022
158
37
Hi everyone I just wondered if you can fit genuine mudflaps without removing the wheels ? Plus anyone know the cheapest place to get them from thank you so much
 
I’ve not fitted these, but assume that you just need to remove some of the torx screws holding the wheel arch liner in place - will just need a 90 degree torx set similar to an Allen key set. Made easier on the front by turning the wheel to full lock to give you additional room.

Rears have different profiles for standard/FR modes and 5dr/ST so make sure you get the correct ones.

OEM ones are listed here - they have the part number in the listing, so you can search the web for a better price too:

 
  • Like
Reactions: Leonfrdiesel184
Hi everyone I just wondered if you can fit genuine mudflaps without removing the wheels ? Plus anyone know the cheapest place to get them from thank you so much
Have not fitted them - but would suggest it would be much easier if you remove the wheel. Some you can barely get your hand between the tyre and wheel arch.
 
  • Like
Reactions: Leonfrdiesel184
Thank you everyone for the replies.

I got some genuine ones from ebay which luckily were on offer and cost me 60 delivered for front and rear.

I can confirm that I fully fitted them without removing any wheels at all. The fronts I just turned the wheel on full lock and the rears I used a mini wratchet set and got the rear torx of no problem.

Thanks for everyone's help and made a good difference stopping crap going up the car