So i noticed in the OBD11 list of coding adaptions one for the haldex clutch.
Open / Close Haldex (Mechanical)
Activating the clamps are opened and once changed check again closed.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Open Haldex
4 - Select - Clutch Haldex close
- Not enabled (default)
- Activated
Does this mean you can apply the clutch and have permanent 4drive?
Open / Close Haldex (Mechanical)
Activating the clamps are opened and once changed check again closed.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Open Haldex
4 - Select - Clutch Haldex close
- Not enabled (default)
- Activated
Does this mean you can apply the clutch and have permanent 4drive?
