Remus twin exhaust for TDI

[Deleted member 85142]

I am looking to put a Remus twin exhaust on my TDI Leon but wanted to know if the full Remus system will fit/work or shall I just use the back box?

Is there any benefit in putting the full system on?

Thx

 

[locky]

Funnily enough this has been asked before!

http://www.seatcupra.net/forums/showthread.php?t=259474

http://www.seatcupra.net/forums/showthread.php?t=350778

http://www.seatcupra.net/forums/showthread.php?t=321291

http://www.seatcupra.net/forums/showthread.php?t=346953

http://www.seatcupra.net/forums/showthread.php?t=181083

 

[Deleted member 85142]

Hmmm, unfortunately no mention of the full system! But thanks anyway!

 

[locky]

Simples, you can't put a petrol full system on a TDi mate.

 

[Deleted member 85142]

Thanks. I've got the rear BTCC bumper going on so need to have the twin exhaust. Somehow.

 

[locky]

Just do what they do to a Cupra exhaust to turn it into an R exit, chop off the backbox and pop on the Remus.
You might need a reducer sleeve, not sure if the pipes are the same dimension.

 

[locky]

Thanks. I've got the rear BTCC bumper going on so need to have the twin exhaust. Somehow.

Actually what I said above isnt correct as I thought you meant the centre twin (Cupra R style) not the BTCC style with a pipe on each side.
Probably the same solution though.

 

[Deleted member 85142]

Thanks

 

[Fishy]

Anything can be fitted, just need to find the right person to do it. Any half decent exhaust place should be able to sort it for you.

Fish

 

[Deleted member 85142]

Cheers pal

 

[Mackers]

I've jus fitted a twin exit on my tdi fr. Easy jb. Took about 30mins. Also had to cut the black section that the number plate is on.

 

[Deleted member 85142]

What mods did u have to do Mackers?

 

[Mackers]

Nowt basically. Except cutting the black section that the plate sits on for the other tip. The pipework fitted no proplems.

 

[Deleted member 85142]

That's what I wanted to hear! Thanks mate.

 

[Mackers]

I got my twin exit from a local lad on FB. From the mid section back.. only fitted the backbox. Dead easy... measure twice cut once.

 

[Deleted member 85142]

Ha, measure twice, cut once. Good advice. Thanks.

 

[Mackers]

I would post a couple of pics. But i dunno how. Hehe

 

[Mackers]

http://www.ebay.co.uk/itm/SEAT-LEON-FR-CUPRA-REAR-REMUS-TWIN-EXIT-EXHAUST-BTCC-/221750057484?pt=LH_DefaultDomain_3&fits=Car+Make%3ASeat%7CModel%3ALeon&hash=item33a1555a0c
This may work off ebay...not my own picture.
but i basically fitted this...

 

[Mackers]

But mine was a stainless zorst.

 

[Deleted member 85142]

Haha, that's the one I'm buying mate. Really appreciate your input.