Rieger Rear Diffuser

[CupraBenny]

Hi,

Can anyone more knowledgeable than me confirm if the Rieger diffuser is model specific?

I.e will a diffuser off a hatch fit the ST?

 

[Redline]

It's model specific.
It says on their website what fits which car.

 

[Damo H]

Hi,

Can anyone more knowledgeable than me confirm if the Rieger diffuser is model specific?

I.e will a diffuser off a hatch fit the ST?

As redline said, the diffusers (and bumpers) are a different shape.

 

[gb]

Asked the same question on seat fb pages and the 280,290 are different from the 300 5f different part numbers and different fitting

 

[Norbert]

Some one know which fit st fr facelift?i cant find on ebay.

 

[Jaco2k]

Some one know which fit st fr facelift?i cant find on ebay.

This one does - got it on my car
https://m.ebay.ie/itm/Rieger-Rear-Insert-only-Cupra-st-Combi-Sg-Seat-Leon-5F-/273504549561
Didn't buy from that source but it is that part number.

 

[Norbert]

Thanks for that. I find this but not clear the exhaust cut both side?

 

[Jaco2k]

Thanks for that. I find this but not clear the exhaust cut both side?

Yes. It is a straight replacement. Pull old part out, put new part in.
...this is largely oversimplified, since it was far from easy to pull the original splitter out - had to use quite a lot of force.

 

[Norbert]

My problem fr fitted one side exhaust and second hole will be funny if nothing there.
I know easy enough to replace vw lego.

 

[Jaco2k]

Then, I am sorry - I missed the FR part.
I got a Cupra, which has the 2 exhausts.

 

[Jaco2k]

Maybe try to look here for a part number for your configuration:
https://www.jms-fahrzeugteile.de/Aerodynamik-Styling/Seat-Tuning/Leon-5F:::2348_30273_157363.html

That is the actual site I got my diffuser and splitter from.

 

[Norbert]

I think i find one.
Not uk but same under £200 from germany.

 

[Norbert]

https://www.ebay.co.uk/itm/Rieger-H...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
Ordered...

 

[Norbert]

Arrived today!
I believe the pre drilled holes was wrong place so i had to drill away some mm.
all good now.

 

[Redline]

Looks good!

 

[Norbert]

Looks good!

Thanks need lowering and the wheels really in so maybe spacer too.

 

[Jaco2k]

Arrived today!
I believe the pre drilled holes was wrong place so i had to drill away some mm.
all good now.

Eh? Mine were all ok, except for a couple of pesky holes that I could not for the life of me figure right near the exhaust.

 

[Norbert]

Eh? Mine were all ok, except for a couple of pesky holes that I could not for the life of me figure right near the exhaust.

Exhaust was easy but another side bottom 2 screw one the new bracket/L shape didnt match.
Not big issue but both trouble so must be drilling problem.