Serious audio upgrade

[StrongTequila]

Original "premium" Sennheiser sounds like a Chinese rattle
I like good sound so...
three-layer sound insulation of all doors
twitters - BRAX GRAPHIC GL1 MK2
mid range - BRAX GRAPHIC GL3 MK2
mid bass - HELIX Ci7 W200FM-S3
subwoofer - HELIX K 10SE.2
disable back doors sound, disable stupid center
amplifier/audio processor 12 channels - HELIX V TWELVE DSP MK2
to adjust volume, subwoofer level and frequencies - Audiotec Fisher conductor
customization of the front pillars so that tweeters would fit in and look at the listener
after a month of using simple settings and acoustics build-up, about 5 hours of precise sound settings with professional equipment
Possible only play music well via a wire directly to the audio processor. Via CarPlay through original head, the sound is terrible. It has its own audio settings and it is very difficult to change them.
But all control of tracks and pictures is of course through Carplay
Now I am a happy person

 

[Nexus 6]

Maybe some photos of the midrange?

 

[StrongTequila]

I don't have any photos of the installation process at this point, but this is the model on the picture
I had to cut out the back wall of the glass from the original midrange speaker because in the original it was probably necessary that it would not play in the door, in my case it was just the opposite. But there are photos of funny speakers that were pulled out from there, they are not premium, they are really funny

this is twitter

this is midrange

this is midbass

and the sub

this had to be cut because the midrange didn't fit

a little bit of the soundproofing process

video of ready new stands for tweeters because they are big plus they should look at the listener and not at each other


this is new midrange

 

[Nexus 6]

I'm curious where you mounted the midrange driver.

 

[StrongTequila]

I'm curious where you mounted the midrange driver.

in the original place, only had to expand it a little