Size of Pipe Work (BAM)

[edmong]

Hi Guy's,

Looking to replace pipe numbered 41 in the below link. Its the one from the intercooler pipe to the dump valve I think!? Just need to know what size the pipe is and if anyone else has changed it.

http://www.vagcat.com/epc/cat/se/LE/2004/268/49/4753599/#41

 

[Lee M]

Hi Mate,

I've just asked a similar question to yours about silicon boost hoses, I'm after pipe 51 & 41 in that Vagcat diagram.

I'll let you know if I find anything.


Cheers

Lee

 

[edmong]

Just replied to yours

 

[edmong]

The bigger pipe from the charge pipe.

http://s167.photobucket.com/albums/...n=view&current=Pipe-afterrelocation2Large.jpg

D.K have you replaced it?

 

[D.K]

I'v just replyed to you both in Lee's post.
I replaced the smaller one.
I think you will have trouble useing stright tubeing because of the tight turn's, it might kink
This is the tubeing you will need
http://www.forgemotorsport.co.uk/content.asp?inc=product&catalog=0022SH

 

[edmong]

so whats the internal diameter of the big hose then? any ideas? maybe I should just leave it

 

[D.K]

so whats the internal diameter of the big hose then? any ideas? maybe I should just leave it

I'v got a charge pipe in my shed I'll measure it after I'v had me dinner

 

[Feel]

Can't see the vagcat diagram, but the large one in the photo is 25mm.

It's really tight in there, you might get a silicon 90 in, and some hose joiners.

 

[D.K]

Yep Feels right I just measured it and it's 25mm

 

[edmong]

Can't see the vagcat diagram, but the large one in the photo is 25mm.

It's really tight in there, you might get a silicon 90 in, and some hose joiners.

25mm internal diam?

 

[D.K]

25mm internal diam?

Yep

 

[edmong]

Sorry D.K posted the same time!

25mm ideal. Thanks for all your hard work, especially D.K! and i didnt ruin your dinner!

 

[D.K]

Let us know how you get on with it, I was thinking about doing the same.