It says nothing on mine. But they are marked TRW and pads are FerodoWith performance pack you get the Brembo logo on the from calipers but what about the rear ones? Does it still say "Cupra" on them?
It says nothing on mine. But they are marked TRW and pads are FerodoWith performance pack you get the Brembo logo on the from calipers but what about the rear ones? Does it still say "Cupra" on them?
It says nothing on mine. But they are marked TRW and pads are Ferodo
Test fitting of the above mentioned Ultralleggera, tyres due on tuesday.
A lot of 19" won't fit and 18" is harder again.
From here:
https://www.seat-leon.de/vboard/showthread.php?t=107928
The OZ Ultraleggera 8x18 ET45 and MAM RS2 18 from that thread fit with just a few mm to spare. Balancing weights need to be glued in the middle of the rim barrel to not to interfere with the calipers. Looking forward to learn about more 18" choices.
Yes but stretched on a wide 8" rim, not recommended for winter. Perhaps a 225/40 would be better...I think these will fit
NOKIAN HAKKAPELIITTA 8 215/45R18 93T XL
With Brembo, NO. Brake clearance gets worse with higher ET, but low ET makes the tyre go into the front arch.Do you think I can use any 8x18 ET45 rim? ET50 better fit?
With Brembo, NO. Brake clearance gets worse with higher ET, but low ET makes the tyre go into the front arch.
If you can find a wheel that clears the brakes with the spokes and ET50, than no problem. But the performance wheel is special, it's the only wheel that clears at et50 I know about.ok but the performance wheels are ET50 so why not the same on 18 inch?
When do we get to see you new rims?
Thanks for the useful information. Just searched this up while I'm waiting for my car to be delivered. 235/40 18" all-seasons are waiting at the dealers ready to go on my ET45 wheels (currently on my Ateca) so I'll be keeping my fingers crossed. The 19s will go back on next spring and if the winter's anything like the last one, I'll be using my Nokian-shod quattro.Here you go.
Weights must be set in the middle of the barrel to clear the caliper.