yeah cheers for that man ! ! fiddly trying to get the ones in the boot out. lol one bolt that was hard to get to.
Tell me about it, I had the OE's to remove then the fully smoked on one side, them on the other and then had to remove one again and fit the matching fully smoked. Did really well until the very last nut and dropped it down the hole. Took ages in my mates to find a suitable replacement nut.
You can do, someone on the forum has with tail light tint spray and looks quite good. However this set has been done professionally with a coating and laquer.
LightKings do them on ebay.
http://cgi.ebay.co.uk/Seat-Leon-Rea...ryZ72248QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
at hat price ill give it a go myself
I didn't think they were too bad a price. Knock off £30-£40 if you sell your OE lights. They can always be sold on when you sell your car etc...
If you do them yourself I'm sure the finish will not be as good. I tinted some indicators and laquered them. They looked ok from a small distance but up close kinda looked a little speckaly.
I'd but another standard set to practice on as it would be a pain to remove if you fecked up.
Cupraloon
Guest
I've been considering doing my black bits on just the door's and apparently you can buy primered trims from seat, ready to paint, but after the hash up i made of painting my delocking cap, which i'm going to have to redo, i'm a little apprensive..
Btw, the lights look good fella...
Last edited by a moderator:
Done mine myself...
Just as good as 'kings'....if i say so myself
Just needs meticulous masking & patience !
Just as good as 'kings'....if i say so myself
Just needs meticulous masking & patience !
Last edited:
a colour code would only cost 150 - 200 for a professional to do.
Considering the Primed side bits are £24 each thats £100 for parts add on 30 for materials and you might aswell get someone professional to do with a perfect finnish.
Considering the Primed side bits are £24 each thats £100 for parts add on 30 for materials and you might aswell get someone professional to do with a perfect finnish.
I did my tailights on my Arosa, took a few hours and I keep getting asked where I bought them from. Pretty easy to do yourself, all about preparation. Lets face it if a numbnuts like me can do it anyone can !
I bought a set from the lightkings in May 2006 before their prices went up. Finish is very good on them and still look great 1 year on
hey i like the dark look on the lights. not sure it would look good on mine though. bought them pre smoked. ;0
So how would you go about tinting them yourself? sand the inside of the lense? (sorry for the noob questions) And where can you get the spray?
beezasport
Sold the car to buy a....
As beezasport said. You can get tinting spray from most places like Halfords, Demon Tweeks etc. One of the most comon brands is Folia Tec although there are plenty of others and not just in a smoked tint either. I remember doing my old 82 Mini's rear lights in Blue tinting spray.
Then just buy a small can of clear laquer and go over the light unit.
As also mentioned. Its might be best to get a spare set of lights to practice on. Best place is Ebay or a scrappy as main dealer price for each rear light unit (4 in total) is £65 each (£130 a side)
Then just buy a small can of clear laquer and go over the light unit.
As also mentioned. Its might be best to get a spare set of lights to practice on. Best place is Ebay or a scrappy as main dealer price for each rear light unit (4 in total) is £65 each (£130 a side)
beezasport
Sold the car to buy a....
Similar threads
