Split R

[arron2004]

Hi ppl! doese any 1 have a picture of there forge split r fitted to there mk3 cupra with standard pipes ???? as i have fitted it and there seems to be no air coming out the trumpet?? what could be wrong? it seems as if all the sound is coming out my induction filter?? thanks arron

 

[Dan_the_man]

Which way have you fit it? Same way as standard or the other way round? When i fit mine the same way as standard it didn't work at all, all I could hear was turbo chatter!

So fitted it the other way round, with the trumpet facing the bulk head and it seems much better.

However I am not sure exactly how it should be fitted buy ill get a pic up later for you to see!
Hope this helps

 

[Forbez]

It should be fitted in reverse to the standard one

 

[arron2004]

i have fitted it so its facing bulkhead, should it be very loud as im not sure what sound im after? plus my boost gauge is alll off now whys this? i have tryed to ajj???

 

[Dan_the_man]

Its not too loud, but u should notice it. Turn the top adjuster all the way anti-clockwise and try it.

Mine sounds loudest if i floor it and let of at about 3500 rpm rather than when i take it to the red line..

 

[Cuprajohn]

you can see mine here, hope it helps

 

[Dan_the_man]

When I plumb my boost gauge into the vac hose my split R stop working...i.e No noise. But when i bypass the gauge and connect it straight to the Split R it works fine?

Why and how can I get them working at the same time??