this MBC for 1.8t ,thoughts please

[p34ch3y]

right first of all i have no intention of buying this im very board at work found this on ebay and interested as to what the clames are for this MBC for any 1.8t

thoughts towards this please http://cgi.ebay.co.uk/Modshack-boos...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318

 

[DPJ]

You can achieve the same thing for £25.......

 

[Myki da Pyki]

Looks cheap as fook as if some pikey put it together with the few bits of pipe he had left over from weighing in lol

 

[p34ch3y]

lol looks wel cack dont it.....look at the price as well :w4nk:

 

[Robbie C]

Many people on here running MBCs? Undecided whether to run one on my hybrid or not

 

[Damoegan]

You could prob buy all the parts its made from for about £15 and make one.

But like Dave said, you can achieve the same thing for £25

 

[DaNnY_LaD]

Im running a mbc and the advantages over the N75 i got was no Horrible pre/Boost spike like the n75 did and No Boost surging which to me was horrible.And you can hold what ever PSi/Bar you want within safe/Peraimeters of the Turbo and Ecu ..Plus more relibable...
It also Stop Random boost creep aswell

With the N75 on the Gt2x i was hitting 20psi and holding 19psi But with a low to high gear run it would peak at 26-27psi then just drop like a k03 would...
Now its holds Boost from 3k to just before the limiters @ 1.5bar(23psi)

Absolute Peice of piss to fit and id spend a little on getting one...theres 1000's on ebay from £10-£140

I got a turbosmart Billet one which IMHO is awesome...Its £40 cheaper than the forge one and does the same job...for £50 Just to pipes thats it...
And its Made by a Good manufacture as you know ''Turbosmart''...

It really Depends How your Mapper wants to map it or if the turbo reguires it..

Like Benny and philW run a MBC/Bleed valve there k03s with stage 2...

Im sure ive missed some points off ..

 

[RichFred]

It's one of these: wakka wakka

Far far better than just an MBC.

 

[RichFred]

A bit OT but there's a shed load of info about 1.8t's on that site too, i've spent many hours on there when I should have been working...

 

[tarzan]

i have a hallman pro boostcontroler works really good to.the bullet inside is of titan.

 

[s1l3nc3r]

is it just me or does the grey knob on the left in the pic look like its off a radiator...??

 

[Damoegan]

They both just look like air pressur regulators.