To do list before remap?

[Cupra20v]

Hi everyone. Im after a bit more power so thought I would go for a remap,
A friend has offered me the following,
Bam 225 injectors, s3 maff and s3 fuel pump,
Would these be worth fitting? I don't know much about cars so thought I would ask the lads I here for some advice,

What would be the most important upgrades going from completely standard?

Thanks in advance!

 

[wezza12]

Most people add a k03s turbo all you need for that is front mount bigger downpipe and exhuast system turbo inlet pipe and a decent air filter. The s3 pump would be good for that as the 3 bar pumps are weak you will also need a 4bar fuel pressure regulator. Don't bother with the injectors or maf unless you going for a bigger turbo

 

[Cupra20v]

What sort of air filter would you recommend?
Fmic, tip, filter and exhaust system are first things I will get done

 

[ibizacupra]

Hi everyone. Im after a bit more power so thought I would go for a remap,
A friend has offered me the following,
Bam 225 injectors, s3 maff and s3 fuel pump,
Would these be worth fitting? I don't know much about cars so thought I would ask the lads I here for some advice,

What would be the most important upgrades going from completely standard?

Thanks in advance!

to achieve what exactly tho dude?
injectors, no
S3 maf, no
S3 fuel pump - perhaps if you block off the extra outlet on it

K03 in your car
your maf and injectors are adequate for what that can push out

 

[Cupra20v]

I would like to get it sitting comfortably over 200bhp, (I'm not greedy) haha
I am more interested in low end power though,
Recommended air filters and downpipe?

I will take the fuel pump then and not bother with the maf and injectors, just got offered them from a mate for free so thought I would ask if they were any use to me,

 

[ibizacupra]

if you have plans for larger down the line then the injectors and maf tube would be handy... if they're free and all that

Open decent size cone (70mm neck) will go direct onto your maf.
200bhp is the usual 'healthy' std k03 turbo ibiza output.

fmic will help, the ibiza one is tiny, and 3" downpipe will also help

all depends how far you want to go really

 

[Cupra20v]

Well I can't say I won't want to go bigger in the future! haha

Will get what has been suggested for now, see how I get on with that,

Best choice of filter without breaking the bank?

 

[wezza12]

Jetex filters are good mines just over 200 and it's quick enough for road use

 

[wezza12]

£50 odd quid off eBay

 

[ibizacupra]

£38+vat for 70mm JR one

 

[Cupra20v]

Got a link for that mate? Will get it ordered tonight
Thanks!