Kernowjc

Guest
Hi all, can anyone help regards to what tool I need for the rear caliper mounting bracket please.

Why can't it be as easy as the front calipers :mad:

Cheers guys

Jc

Sent from my HTC Desire HD A9191
 
Sorry I meant for the 2 bolts that hold the caliper mounting bracket onto the back of the hub. So I can get change the discs. Thankyou for your help tho :)

Sent from my HTC Desire HD A9191
 
Last edited by a moderator:
Thankyou very much. Another stupid question now where do I get one

Sent from my HTC Desire HD A9191
 
I don't know if it's a 'special tool' or a standard spline bolt. It depends on the number of splines on it, there are plenty of sets on e-bay for £6-7.

If you search on the tool number, you should be able to find places that sell it but probably a lot more expensive.
 
Thankyou very much again hopefully it won't be to expensive

Sent from my HTC Desire HD A9191
 
Had the same issue, they are and absolute tw@t. Took me and my mate 2.5 hours, because of how tight the bolts were, and lack of access. As above you can buy a apline set from Halfords. We found the easiest way was to use the spline socket, (think it was size 14) use a fixed bar, from a socket set and use the wheel brace. Just make sure you get the car as high as possible, and that you use axel stands, and chock the front wheels. Because we had to use a lot of force. We then used copper grease to hopefully make it easier to remove next time.
 
Brilliant looking forward to it even more now :/. Thanks for the tips tho guys by the sounds of it in going to need them

Sent from my HTC Desire HD A9191
 
There doesn't look like there's room to do that. I'll give it a go tho

Sent from my HTC Desire HD A9191