think most people are having the same isea to save the money
the bottom of the airbox is off now but its similer
the bottom of the airbox is off now but its similer
-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
jetex
- Thread starter davegrayburn
- Start date
-
- Tags
- jetex
yeah i know it was a bargain at 9.99 closing down sale 
it supports 250bhp so it will be changed before the re-map but ive already got eyes on a jetex anyway..
besides its not how big it is its what it does that counts " so im told haha "
it supports 250bhp so it will be changed before the re-map but ive already got eyes on a jetex anyway..
besides its not how big it is its what it does that counts " so im told haha "
Deleted member 12147
Guest
To secure it i drilled a small hole in the end of the filter. I then used a long threaded screw/bolt, 2 washers, a nut and 2 rubber door stops which where joined together and trimmed down to fit the securing hole. All bought from b&q.
If your after a large jetex cone but worried about heat soak why not consider jabbasports induction kit?
It really is an excellent kit!
Gotta admit that does look good
Is there any cold air feeds to it???
How much for the whole kit if you dont mind me asking???
It uses the standard cold air feed but it’s up to you if you fit a larger one. They’ve allowed for it in the design.
http://www.jabbasport.com/store/index.php?app=gbu0&ns=prodshow&ref=JSIKLEONFBW
I can’t remember exactly what I paid but I didn’t pay the price listed on there website. Your best giving them a call! They usually do it for less!
http://www.jabbasport.com/store/index.php?app=gbu0&ns=prodshow&ref=JSIKLEONFBW
I can’t remember exactly what I paid but I didn’t pay the price listed on there website. Your best giving them a call! They usually do it for less!
just spoke to kevin at gabba and they do sell the heatshield seperately £65.00 inc vat..about £5.50 pp
It’s with a J buddy, Jabba! Lol Did you ask for a price for the full kit? You need to add the price of a cone, 90mm coupler and 90mm – 80mm silicone reducer (if you want it to fit snugly in the heat shield) then make something up on the end of the cone to attach it to the car. It might be worth getting the whole kit if they will do it for you for a good price! 
Is the Jabbasport filter quite loud?
I had a Jetex filter on my previous car and it was very loud, buggered up my maf so it got removed within a week!
I had a Jetex filter on my previous car and it was very loud, buggered up my maf so it got removed within a week!
B3LSY
Guest
I think it’s about as loud as your going to get! To be honest I doubt it did as there very lightly oiled. How was it supported? Probably more to do with vibration or just a coincidence! There’s loads of people on here running Jetex cones with no related problems!
I think it’s about as loud as your going to get! To be honest I doubt it did as there very lightly oiled. How was it supported? Probably more to do with vibration or just a coincidence! There’s loads of people on here running Jetex cones with no related problems!
It may well have been a coincidence or just down to it being a French car.
But i have to say it was very reliable up until then... The Jetex filter i was supplied with was quite heavily oiled IMO so it could have been a one off that i just ended up with, thats the kinda luck i have.Anyways as for the Jabbasport one being as loud as your going to get, i think I'll give it a miss on that basis. Think I'll stick with my BMC-CDA but thanks for the info
Anyways as for the Jabbasport one being as loud as your going to get, i think I'll give it a miss on that basis. Think I'll stick with my BMC-CDA but thanks for the info
Let’s not forget that the only induction noise you get is the satisfying sound of the turbo spooling up and the diverter valve gently blowing air back through the turbo via the tip!
fitted my jetex yesterday....the only noise i really get is as lofer says..turbo spooling up and dv..ordered the jabba heatshield today.
Similar threads
