-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
remap
- Thread starter swampy06
- Start date
tbh mate i think your being very optimistic with 220bhp figures from an fr on just a map. (unless you have other modifications).
after looking at revo results for a cupra, they have only quoted 215bhp after map. baring in mind the cupra has 30bhp over the fr as standard.
might be worth enquiring with revo first to save dissappointment
Really?!?!?!?!?! Hmmmm never knew that. Revo maps to 215bhp as it states on their website. But there website has a graph with 1 hitting 221bhp
im guessing the cupra with the 225ps s the one shown in the graph at 221bhp then. when i get round to getting mine mapped ill look into it all and check for the best option
There a some posts with interesting info on this. The map used on the revo site shows their car made 195ish BHP pre remap (as did mine) theirs made 123BHP post remap with high octain fuel. 215/220BHP should be possible on most cupra/fr engines. Probably more like 230bhp with exhaust and breathing mods and map to suit.
The torque is a completely different matter though
The torque is a completely different matter though
There a some posts with interesting info on this. The map used on the revo site shows their car made 195ish BHP pre remap (as did mine) theirs made 123BHP post remap with high octain fuel. 215/220BHP should be possible on most cupra/fr engines. Probably more like 230bhp with exhaust and breathing mods and map to suit.
The torque is a completely different matter though
what torque figures do you think are reasonable? i may be being a little pesimistic here but i think there may be a possibility that the dynamometer they used may be a little generous if it says it is producing 27bhp more than it should as standard.
it wouldnt be just a map i no, would be other modifications too such as exhaust etc,blah blah just wondering were the nearest one was, seems like thurock to mee bit of a drive but will prob be worth it, just waiting for miltek to hurry up and for a induction kit
bit of a drive but will prob be worth it, just waiting for miltek to hurry up and for a induction kit
elaborate please lol.
300 nm of torque is a good enough number for me. also is 220bhp sounds good to me lol
revo ftw haha
I couldn't possibly divuldge any further info
![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
lol damn might jst have to wait then wont iIt's more like 280nm which is safer IMO. They can do 320n
from a stage one but this isn't good for the dsg.
from a stage one but this isn't good for the dsg.
http://translate.google.com/transla..._IBIZA_CUPRA_TSi_REVO_Stage1.html&sl=el&tl=en
220 hp and 320nm with air intake and Revo remap.
220 hp and 320nm with air intake and Revo remap.
Educated guess, someones going bk to forge with there induction kit and they may have a look at the inter by any chance?
Educated guess, someones going bk to forge with there induction kit and they may have a look at the inter by any chance?
More like it's booked in for the ic and they are finishing the induction kit ;-)
320Nm is possible as I said but I wouldn't want that going through my DSG. Look at the torque figure on the standard scirocco map, it's higher since most are manual.
May be worth looking if the s3 or the seat sport intercooler will fit?
May be worth looking if the s3 or the seat sport intercooler will fit?
Similar threads
