HELP QUICK... are these the right spacers?

[itfben]

http://cgi.ebay.co.uk/20-mil-HUB-SP...s_tyres_Trims_Car_Rims_ET&hash=item1e5edd9c03

they dont look right to me but apparently they are right for my 1.6 mk1???

they good price and i they are right and good it would be cool to order them to get them for the weekend.

 

[t32er]

they are universal ones
make sure the bolts are the correct thread and they should be ok

 

[itfben]

o god i dont think i want them then. especially with a 20mm a corner stretch.


keep it 5x100 then, ye? safer bet?

 

[itfben]

like these: http://cgi.ebay.co.uk/15mm-5x100-hu...aultDomain_3&hash=item45f62d3bae#ht_650wt_897

 

[t32er]

there much better mate
i bought a set of 15mm universal ones, bolts didnt fit the holes on them lol

 

[itfben]

screw that 5x100 it is then.

the guy sell the ones in the 2nd link said...

"they are for FRONT HUBS NOT REAR because they manufactured them for the spigots on the front only, not the rear.

they may fit your rears, some leons came out of factory with different spigots on the rears. ive listed them as fronts only to avoid any dissapointment."

make sense to you?

 

[t32er]

non at all mate... my fronts fit my rears, my spare fits them all.... im sure yours is the same
i have never heard of that

 

[itfben]

confused me too. im sure a spacer boff will be along shortly to prove us wrong.

 

[Cowie]

how about these?

http://cgi.ebay.co.uk/VW-AUDI-SEAT-...314?pt=LH_DefaultDomain_3&hash=item255e3fd412

 

[t32er]

get lee on the case mate!!!
actually b4 you do that have a quick surch there has been a few Qs about spacers etc

 

[itfben]

i also heard the best spacers are the ones that bolt to your hub then your wheel bolts to the spacer rather than wheel through the spacer to the hub?

 

[itfben]

actually b4 you do that have a quick surch there has been a few Qs about spacers etc

from me i have done some research already, im not starting a new thread purely to be lazy.

 

[t32er]

from me i have done some research already, im not starting a new thread purely to be lazy.

lol.... i do lol

i dont think it makes a lot of diff how they fit, it still puts stress on the bearing, the ones that bolt to the hub will be better when it comes to putting the wheel back on...

 

[itfben]

how about these?

http://cgi.ebay.co.uk/VW-AUDI-SEAT-...314?pt=LH_DefaultDomain_3&hash=item255e3fd412

they more expensive that the 2nd listing.

 

[gezmeister]

Rears

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=390201021202&ssPageName=STRK:MEWAX:IT

Fronts

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290459243602&ssPageName=STRK:MEWAX:IT

Job jobbed

 

[andy_lang]

I got those - 20mm universal jobbies, had them for yrs but hadnt needed them on past few cars, and only wana push out my rears like 5-10mm, certainly not 20!

How much is he asking for those Ben - ill give you mine for beer

 

[Stewlcr]

I would never use 20mm universal spacers, hubcentric everytime, think of the stress om the wheel bolts with universal ones, hubcentric ones totally eliminate this, using any spacers youll get extra stress on your bearings

 

[itfben]

I got those - 20mm universal jobbies, had them for yrs but hadnt needed them on past few cars, and only wana push out my rears like 5-10mm, certainly not 20!

How much is he asking for those Ben - ill give you mine for beer

Mr Andy Lang how about we go ahead with the deal we were talking about and you bring the spacers down as well and i will take ya do a beer then? they a pub just up the road, we can have a leon chat over a pint

 

[itfben]

even better idea, pop down this evening to do deal and we can go up to a little car meet thats going on, il buy ya a drink before or after for the spacers.

 

[andy_lang]

HAHA Fraid im busy this evening, but then again taking the day off work 2mz and mates are getting me at 11!!! So I could get to yours for midnight - sink a cheeky few, do our original deal and see if you want these LOL

If so, how about plan D - and Ill keep the originals