Video for n249 & n112 inside

[yellonvi-R]

Thought id put this in its own thread as people still have trouble with it. Its not a video to show how to do it but what it looks like when done so hopefully you'll get the idea lol

Sorry for the ****star out of breathness but was running round with the 3 kids then came out into -5 lol brrrrr....

http://i878.photobucket.com/albums/ab342/scoobykilla/858eb9d1.mp4

 

[dub17]

could you link me to the resistors you used so i know what im looking for please mate

 

[Big-Pete]

so n249 is put resisters in and run from dv to inlet mani?

and n112 is actuater to EGR

both blocked off with 330ohm resisters!?

 

[yellonvi-R]

Yes big pete thats it. The resistors are 20p from maplins 330ohms

 

[Big-Pete]

Yes big pete thats it. The resistors are 20p from maplins 330ohms

fudge me sideways why does everyone make such a big deal about it?!

i take it its the same if you had a ko3s turbo :/

 

[yellonvi-R]

Id asume so mate.

 

[tom w]

If you have a ko3s all you nee to do is run 1 line to the fpr and one line to the d/v from the mani
So the only line going to the actuator is from the n75
And resistor the n112 and n249 or just leave them plugged in and hide them away

 

[mc funbot]

About time someone did this I was going to. You wouldn't believe how many times I've told or shown it written on here how to do it!

 

[yellonvi-R]

Hoped it would help. Even though i posted it ages ago lol there are so many threads for this simple job. Although it was you that put me on the right path jedi!!)

 

[Big-Pete]

Someone sticky this!!