Proper seat specs for Cupra R 19" alloys.

[Cupra R Matt]

Can any of you guys please advise what the proper Seat specs are for the O.E 19" alloys wheels as fitted to my LCR??

Stud spacing,offset, wheel width i mean!

Possibly looking to get aftermarket alloys and want specs as close to Seat O.e ones as possible so i won't have ANY issues with the wheels/tyres catching anywhere - especially as i'm considering lowering it on H&R springs aswell!

Have tried searching on here but can't find the info i'm looking for specifically!

 

[Redemption]

They're 19 x 8j. PCD is 5 x 112. Not 100% sure of the offset but I think it's ET53. It should be stamped on the inside of one of the spokes.

 

[Cupra R Matt]

I'd have a look on mine, but they've got loads o layers o paint on em so any writing on the inside of the spokes is just a blur

There not 8.5j then!??

 

[Redemption]

I'd have a look on mine, but they've got loads o layers o paint on em so any writing on the inside of the spokes is just a blur

There not 8.5j then!??

Nope. Only 8j. Just had a look in a Leon brochure at the specs. ET is also 53 according to a quick google with their part number.

 

[Cupra R Matt]

friggin ell!

seems like aftermarket wheels in those specs are like rocking horse doodoo to get hold of!

Can get the correct stud spacing and 19" but the width is usually 8.5j and the offset is always lower 40-45!!!

 

[Redemption]

As a reference 19 x 8.5 ET48 will stick out 11mm more than your current wheels. Does give you a bit of room for maneuver.

 

[Cupra R Matt]

Would Et48 8.5j cause problems with chaffing though (anywhere) - especially as i may well be adding some H&R springs!???

Wouldnt want to splash the £££'s on new (potentially VERY expensive wheels only to find they rub!)

 

[Redemption]

To be honest, I'm not sure when lowered. Might be worth asking in the main MK2 section as I think kevs fr has H&R's on his Cupra R (albeit with standard alloys).