My CUPRA K1 PROJECT
- Thread starter benito
- Start date
Niwou
Guest
Well, there are new updates.
It took some time to coordinate all project parts.
This parts list is not final yet:
1. GARETT GTX3071R + TIAL V-BAND 30R EXHAUST HOUSING / 0.82 AR
2. BSH/AFI WORK OF ART EQUAL LENGHT TUBULAR MANIFOLD
3. TIAL MVS V-BAND 44MM EXTERNAL WASTEGATE
4. TIAL QR Recirculating Blow-Off Valve
5.2.0TFSI CUPRA R BLOCK — RE-BORE TO 83.0MM
6. JE 83.0MM BORE / 9:5:1 COMPRESSION FORGED PISTONS
7. CROWER FORGED RODS
8. CALICO COATED ROD BEARINGS
9.FERREA Valvetrain Kit / 2.0T FSI Stock size
10. ENGINE BUILD PARTS — GASKETS / SEALS / HEAD BOLTS / CAM BELT / WATER PUMP
*FORGE-Full silicon colant hoses kit
11. Integrated Engineering Ultimate Crankshaft Girdle Ultimate Kit for VW/Audi 2.0T FSI Engines
12 .Fluidampr Crank Pulley for 2.0T FSI Engines
13.SCHRICK Sportscamshaft-Kit/Intake: 246°-Exhaust: 252°
*Integrated Engineering Billet Adjustable Camshaft Gear for 06F 2.0T FSI Engines
*2.0T Timing Belt Gear Dowel Pin Kit
14. HEP — STAGE 2 Performance Intake Manifold
15. OEM AUDI RS4 FSI INJECTORS+4 extra injectors ( 630cc/min )
16. HPFPUpgrade Stage 2 Fuel pump+Rail Valve 150 Bar
17. H2SPORT Cam Follower upgrade kit
18. Integrated Engineering High Pressure Fuel Pump Blockoff Plate 2.0T FSI
19. Haltech Sprint 500 — ECU for controlling the Extra injection system
20. Ported cylinder head
21. DXD EXTREME CLUTCH STAGE 4
22. ARP Head / MainStud Kit
23. CUSTOM FITMENT BSH 76MM V-BAND DOWNPIPE CONNECTION- INC TIAL V-BAND FLANGE AND CLAMP
24. CUSTOM FITMENT BSH 44MM V-BAND WASTEGATE DUMP PIPE
25. Mishimoto Performance Aluminum Radiator
26. ECS Big Brake Kit — Stage III
27. BSH Engine Mount Package -Engine, Transmission, Pendulum.
28. REVO STAGE 4 SOFTWARE
And of course some pictures will not hurt ..
and my new wheels..
I forgot to mention for project I purchased another engine of the CUPRA R 2012.
Almost new motor threshold was 9,000 miles total.
Original engine fully maintained the good days ..
It took some time to coordinate all project parts.
This parts list is not final yet:
1. GARETT GTX3071R + TIAL V-BAND 30R EXHAUST HOUSING / 0.82 AR
2. BSH/AFI WORK OF ART EQUAL LENGHT TUBULAR MANIFOLD
3. TIAL MVS V-BAND 44MM EXTERNAL WASTEGATE
4. TIAL QR Recirculating Blow-Off Valve
5.2.0TFSI CUPRA R BLOCK — RE-BORE TO 83.0MM
6. JE 83.0MM BORE / 9:5:1 COMPRESSION FORGED PISTONS
7. CROWER FORGED RODS
8. CALICO COATED ROD BEARINGS
9.FERREA Valvetrain Kit / 2.0T FSI Stock size
10. ENGINE BUILD PARTS — GASKETS / SEALS / HEAD BOLTS / CAM BELT / WATER PUMP
*FORGE-Full silicon colant hoses kit
11. Integrated Engineering Ultimate Crankshaft Girdle Ultimate Kit for VW/Audi 2.0T FSI Engines
12 .Fluidampr Crank Pulley for 2.0T FSI Engines
13.SCHRICK Sportscamshaft-Kit/Intake: 246°-Exhaust: 252°
*Integrated Engineering Billet Adjustable Camshaft Gear for 06F 2.0T FSI Engines
*2.0T Timing Belt Gear Dowel Pin Kit
14. HEP — STAGE 2 Performance Intake Manifold
15. OEM AUDI RS4 FSI INJECTORS+4 extra injectors ( 630cc/min )
16. HPFPUpgrade Stage 2 Fuel pump+Rail Valve 150 Bar
17. H2SPORT Cam Follower upgrade kit
18. Integrated Engineering High Pressure Fuel Pump Blockoff Plate 2.0T FSI
19. Haltech Sprint 500 — ECU for controlling the Extra injection system
20. Ported cylinder head
21. DXD EXTREME CLUTCH STAGE 4
22. ARP Head / MainStud Kit
23. CUSTOM FITMENT BSH 76MM V-BAND DOWNPIPE CONNECTION- INC TIAL V-BAND FLANGE AND CLAMP
24. CUSTOM FITMENT BSH 44MM V-BAND WASTEGATE DUMP PIPE
25. Mishimoto Performance Aluminum Radiator
26. ECS Big Brake Kit — Stage III
27. BSH Engine Mount Package -Engine, Transmission, Pendulum.
28. REVO STAGE 4 SOFTWARE
And of course some pictures will not hurt ..
and my new wheels..
I forgot to mention for project I purchased another engine of the CUPRA R 2012.
Almost new motor threshold was 9,000 miles total.
Original engine fully maintained the good days ..
Last edited:
I would say no.
There are 2x 4WD Leons that i know of 1 here in the UK and one abroad. with all that kit hes adding on i would be adding 4WD to the list
i think Stage2+ is the limit for FWD.. ive been tempted to go for Stage3 but keep thinking its not worth it
There are 2x 4WD Leons that i know of 1 here in the UK and one abroad. with all that kit hes adding on i would be adding 4WD to the list
i think Stage2+ is the limit for FWD.. ive been tempted to go for Stage3 but keep thinking its not worth it
Dare I say K04 is plenty for UK roads... for my leon, anymore power = more things to break
PS. Epic Project! Looks great!
That has to be the most extensive parts to be fitted table ive seen.
You must own a parts / spares shop or have a lot of mates who work in the industry..
Looks like you have the modding bug bad
my vote goes for you for nicest laid out buffet table that doesn't have cheese and hot dog party food on or sherry trifle
- I liked the mesh alloys though -
nice 1 mate.......
You must own a parts / spares shop or have a lot of mates who work in the industry..
Looks like you have the modding bug bad
my vote goes for you for nicest laid out buffet table that doesn't have cheese and hot dog party food on or sherry trifle- I liked the mesh alloys though -
nice 1 mate.......SupremeRaptoR
Guest
Must have been expensive?Looks a quality car, where did you get the rear smoked lights from in the third picture they look well smart wouldn't mind some of them for my car haha
![[M]ike](/forums/data/avatars/m/86/86555.jpg?1523533979){kind=avatar}
Ipressive parts list there mate. Wat kind of numbers wil you punch out when the car is finished? Keep us updated.
Amazing work there mate. Love these builds.
Similar threads
