Cupra R brembo's

[Pete123]

How much does a set of brembos with discs and pads etc go for these days?

 

[Seal_LCR]

Last 3 sets I have sold have been £400

 

[Chambers_CUPRA]

Set on eBay for 350 buy now but they need the carriers. But From TPS/dealers there about 100 quid each side.

 

[Tucker157]

Set on eBay for 350 buy now but they need the carriers. But From TPS/dealers there about 100 quid each side.

Is that the carrier yes? Been looking for a rebuild kit but can't find one yet...

 

[Seal_LCR]

If you are gonna rebuild I'll buy a new set from seat 225 a caliper

 

[Tucker157]

They've done a lot of miles now, could do with a rebuild.. Thought they would be more from seat...

So you saying they don't do a refurb?

 

[Tucker157]

They've done a lot of miles now, could do with a rebuild.. Thought they would be more from seat...

So you saying they don't do a refurb?

 

[Chambers_CUPRA]

You can get seals still. Berg had some for his when he first got em.

Iirc they were the same as the LCR

 

[Chambers_CUPRA]

Wonder if seat still sell them?

 

[Seal_LCR]

If I was gonna rebuild I'd just buy new calipers won't be much off the same in the end

 

[Tucker157]

LCR are different size pistons iirc
It's more the screw in pad guides they need.. N a paint with new stickers! But would rather have a full refurb.

 

[Tucker157]

I also can't find the calipers on etka...

 

[Chambers_CUPRA]

What can't ya find the seals?

 

[Tucker157]

The seals or caliper or bracket...

There's discs and pads, and a repair set 6kl698273 and a fitting set for the pads 6kl698295 but I have no picture for those two part numbers and no further info crappy free etka!


Sent from my iPad Mini using Tapatalk HD

 

[Chambers_CUPRA]

Ill post a pic of my ETOS system at work. Sure there on there

 

[Chambers_CUPRA]

 

[Tucker157]

Top man! Crappy free etka!

Got any more info about the repair set? Is that just the bleed nipple And cover?


Sent from my iPad Mini using Tapatalk HD

 

[yellonvi-R]

I sell full set up off the Ibiza Cupra r for £500 every set I've had

 

[Berg]

Parts can be bought from here for brembos

http://www.porschecalipers.co.uk/

If its seals your after then ICR Brembos use the 36mm & 40mm dust seals and Inner seals and the part numbers on this site matched those on my brembos when i replaced

 

[Tucker157]

Excellent info, cheers berg! Do you happen to know where I can get the pad sliders from also? The part that has a stupid small screw holding it in..


Sent from my iPad Mini using Tapatalk HD