-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Peter's Leon - *Mapped* *Soon to be Stealth*
- Thread starter Petey41
- Start date
Awesome mate! I'll send you a pic of the beading when I get a chance! Car could get washed tonight and if it does, I'll fire one up!
Sent from my HTC One using Tapatalk
I did yeah mate, there's the one there
http://www.ebay.co.uk/itm/Meguiars-...ssories_Car_Care_Cleaning&hash=item1e88971b1b
Went and gave the car a wee clean, and wanted to show how well the clay bar and polish worked, as when I poured water over it, it just ran off! Wee video just for you Tom! (For the video below, you need to follow the link
http://s862.photobucket.com/user/peter_osbourne1/media/Mobile Uploads/VIDEO0010_zpsle4xgp1e.mp4.html
Also, finally got round to fitted my smoked side repeaters, really pleased with how it looks! I'll post a video up tomorrow when there is better light but here's the difference between the two, with the original being the bottom repeater.
Of course, it couldnt all go smoothly.. went to open the bonnet with the wipers still up after cleaning and snapped the passenger one in two, along with chipping some of my paintwork![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
But I have a new one on order, hopefully get round to getting the mk4 Golf aero kit at some point! Going to get some paint to do some touching up too, stone chips are a disaster!
http://s862.photobucket.com/user/peter_osbourne1/media/Mobile Uploads/VIDEO0010_zpsle4xgp1e.mp4.html
Also, finally got round to fitted my smoked side repeaters, really pleased with how it looks! I'll post a video up tomorrow when there is better light but here's the difference between the two, with the original being the bottom repeater.
Of course, it couldnt all go smoothly.. went to open the bonnet with the wipers still up after cleaning and snapped the passenger one in two, along with chipping some of my paintwork
But I have a new one on order, hopefully get round to getting the mk4 Golf aero kit at some point! Going to get some paint to do some touching up too, stone chips are a disaster!
Love the outcome of your claying! Never done it before, pretty easy but time consuming, right? Not sure if I told you but I love your alloys! Would love some in black. What shape are they, mate?
Also, the new repeaters are much better.
Also, the new repeaters are much better.
Yeah it does take time mate, but it's so worth it! Cheers mate! Might get them sprayed gunmetal grey! Awh they are rough haha Looks unreal lad, I'll get a video up tomorrow!
Sent from my HTC One using Tapatalk
Easy peasy bro! Get a cloth and a knife and push the back of the repeater (closest to the door) and it'll pop out. Simply turn the black bulb holder and the two pieces will come apart
Sent from my HTC One using Tapatalk
Car looks mint pal!
Keep up the good work
Cheers buddy! It's going stealth in the summer!
Sent from my HTC One using Tapatalk
Reckon so! Gunna spray the front one blue then carbon wrap it, dunno what I'll do with the back, but it'll have some black in it
Sent from my HTC One using Tapatalk
Women Drivers.. And a map!
So had a bit of bad luck at the weeknd. Was driving out a country road when a woman came round the corner on the wrong side of the road, and I pulled into the hedge, where there was a lovely big stone waiting for me. As a result, my passenger wheel then looked like this..
So the hunt was on for new alloys, as that one was in awful shape, and I was getting a bit bored anyway. Found myself a set of 19" RS6s which sat really well on her, so they were bought just tonight!
Earlier on today, I also got a map and a popcorn limiter. I didnt want it to be all power so she got mapped to around 135bhp but still very very easy on fuel! I will post up a video of the limiter, when I get my straight pipe put on her
Currently looking at a few other ideas for her, but i reckon, money will have to be spent on a new clutch asap
So had a bit of bad luck at the weeknd. Was driving out a country road when a woman came round the corner on the wrong side of the road, and I pulled into the hedge, where there was a lovely big stone waiting for me. As a result, my passenger wheel then looked like this..
So the hunt was on for new alloys, as that one was in awful shape, and I was getting a bit bored anyway. Found myself a set of 19" RS6s which sat really well on her, so they were bought just tonight!
Earlier on today, I also got a map and a popcorn limiter. I didnt want it to be all power so she got mapped to around 135bhp but still very very easy on fuel! I will post up a video of the limiter, when I get my straight pipe put on her
Currently looking at a few other ideas for her, but i reckon, money will have to be spent on a new clutch asap
ooh that looks nasty that dent.
looks cool on the new wheel, just needs a slight lowering now and it would look mad
nice mapping to, again was it a diesel?
looks cool on the new wheel, just needs a slight lowering now and it would look mad
nice mapping to, again was it a diesel?
Yeah mate, I love how she looks! Not be long til she gets dropped I hope! Is indeed! Goes like the clappers haha
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Awh mate, completely different machine, I love her! Doesn't be long filling the clocks!
Sent from my HTC One using Tapatalk
Similar threads
