Eibach lowering springs 50/30mm

[Rajraj]

Just would like to see IF anyone have this on a Cupra not an FR etc.

Will this kit will lower a Cupra 50mm in front?

How much is the actuall lowering?
IBACH 50MM/35MM SPORTLINE LOWERING SUSPENSION SPRINGS

Leon 1P 1.8T Si, 1.9TDi, Cupra 2.0T FSi, FR 2.0T Si, 2.0TDi, FR 2.0TDi
Part Number: E20-81-009-02-22

Pictures?


Skickat från min Nexus 5 via Tapatalk

 

[dj_troopa]

Front - 50mm
Rear - 35mm

See here...........

http://www.dpmperformance.co.uk/car...i-cupra-20t-fsi-fr-20t-si-20tdi-fr-20tdi-0805

 

[Aok82]

Does the standard shock absorbers still go if you install lowering springs?
Or do they need changing always?

 

[Rajraj]

Front - 50mm
Rear - 35mm

See here...........

http://www.dpmperformance.co.uk/car...i-cupra-20t-fsi-fr-20t-si-20tdi-fr-20tdi-0805

thats a little confusing, isnt the Cupra Lower than a 1,9 tdi?


Skickat från min Nexus 5 via Tapatalk

 

[Clazzer]

Gents, firstly you can have springs fitted with OE shocks no problems. OP, just do a search mate for Sportlines or Eibach and have a read through a few of the posts. Sorry I can't remember the exact numbers but the figures quoted for the drop are based on a standard model car and not a cupra which already sits lower, I think by 20mm so just have a search and a read and you will find the information that you require.

 

[Rajraj]

Gents, firstly you can have springs fitted with OE shocks no problems. OP, just do a search mate for Sportlines or Eibach and have a read through a few of the posts. Sorry I can't remember the exact numbers but the figures quoted for the drop are based on a standard model car and not a cupra which already sits lower, I think by 20mm so just have a search and a read and you will find the information that you require.

thats the info i wanted. thnx!

read on another webshop "Cupra 20/30mm". with thesame kit.

isnt that a little bit high?

Skickat från min Nexus 5 via Tapatalk

 

[jreedy]

I have eibach sport lines on my cupra mate

The drop is perfect in all honesty

I'll try and find a pic to show you the drop

 

[Rajraj]

I have eibach sport lines on my cupra mate

The drop is perfect in all honesty

I'll try and find a pic to show you the drop

That would be really nice mate.

Do you have 18/19" Rims?



Skickat från min Nexus 5 via Tapatalk

 

[Clazzer]

Again, after doing a search you will find numerous pics of Cupra's and LCR's on 18's & 19's. I only know because I did the same. Eibach Sportlines on 19's look just about perfect IMO. Get searching mate, there's nothing on the TV to distract you

 

[Clazzer]

Here you go, this is obviously a LCR on 19's on Sportlines, go straight to page 17 to see the before and after comparison.
http://www.seatcupra.net/forums/showthread.php?t=379146&highlight=Sportlines&page=17

 

[Rajraj]

Again, after doing a search you will find numerous pics of Cupra's and LCR's on 18's & 19's. I only know because I did the same. Eibach Sportlines on 19's look just about perfect IMO. Get searching mate, there's nothing on the TV to distract you

thanx mate.

Are you sure? Orange is the New black newly realesed on Netflix .

Skickat från min Nexus 5 via Tapatalk

 

[Clazzer]

depends how much you want to find out how your car's going to look
TV after mod research

 

[connery-tdi]

I was informed recently that sport and fr models are 7mm lower and the cupras are 14mm lower than standard. Hope that helps.

 

[T0DDY]

I have eibach sportlines on mine with 18 in wheels,30 rear 20 front not too low but low enough for an old fart with comfort in mind!

 

[shnazzle]

Drop on CupraR does seem lower to me. Here's our R on sportlines. I've edited the picture so that it's more clear where the tyres fit within the arches.

I'm sure FRs sit higher on sportlines.

 

[Rajraj]

Drop on CupraR does seem lower to me. Here's our R on sportlines. I've edited the picture so that it's more clear where the tyres fit within the arches.

I'm sure FRs sit higher on sportlines.

Looks really good. nice car mate.

Do you have spacers on it also?

Skickat från min Nexus 5 via Tapatalk

 

[shnazzle]

No I don't but looking to put some on soon. Especially the rears need spacers. Think we'll go 10mm at the front and 15mm at the back