Torque setting engine mount

[19jeff89]

Can anyone confirm these torque settings,
Is for timing side engine mount
Its for lcr

Sent from my SM-G930F using Tapatalk

 

[19jeff89]

There 2 bolts that bolt the engine mount to the engine mount bracket I've found two different settings one is 100nm the other is 60nm and 1/4 turn does anyone know which is right? It's for lcr

Sent from my SM-G930F using Tapatalk

 

[verbal_kint]

From what I can see on oempc the bolts are common across all the Leons and into the Golf and Boraa and more.

My Golf Haynes manual states 100nm. But I think which setting you go for will not be that far away from the other.

 

[19jeff89]

From what I can see on oempc the bolts are common across all the Leons and into the Golf and Boraa and more.

My Golf Haynes manual states 100nm. But I think which setting you go for will not be that far away from the other.

Ok thanks for reply I've been trying to find out if ones for diesel and the other for petrol but no look yet. Yes they can't be far out I've heard of people's bolts shearing be for so wanted to be sure on the setting

Sent from my SM-G930F using Tapatalk

 

[verbal_kint]

Pretty sure they are one time use stretch bolts and if people re-use them accidents will happen...

 

[19jeff89]

I have just done a test on snap on torque wrench digital on a 17mm bolt and 60nm with 90 degree works out at 91.6 nm

Sent from my SM-G930F using Tapatalk