Zorst's

[Gokiwi64]

Just on a fact finding mission at the moment.

Am I right in guessing that a full turbo back system (not brand specific) is going to cost me around £1300, just trying to setup budgets for the next upgrade.

 

[Thai-wronghorse]

Blimey where have you got that figure from? I'd say most of the commonly used exhaust brands that spring to mind are around half that amount for a full turbo back system.

Sent from my SM-G960F using Tapatalk

 

[Gokiwi64]

Just looking online

http://cobrasport.com/index.php/cob...1-turbo-back-system-sp-cat-non-resonated.html

https://www.hendyeshop.co.uk/turbo-...1a-leon-cupra-r-1m-mk1-02-05-seat-70128-p.asp

 

[Legojon]

Obv mines a MK2... but I'm currently looking at changing exhaust (I'm swaying towards BCS). From what I've seen £1200ish including race cat for an off the shelf (Milltek / Scorpion).

 

[Thai-wronghorse]

I've seen those Cobra ones on eBay for much less, definitely sub £800 as I looking recently.
The latest Cupra R breaker I've got has a full Cobra turbo back system so I was seeing what its value was.

Sent from my SM-G960F using Tapatalk

 

[Leon20vt4]

Uh my god thats expensove i got my Setup for 650 Euros with a 200cell 3"cat at the Very Ende of the downpipe.

 

[Gokiwi64]

As I'm never going S2 I'm not sure I can justify the dollar, would be better off putting it into something else - decent suspension for example ?

 

[Leon20vt4]

As I'm never going S2 I'm not sure I can justify the dollar, would be better off putting it into something else - decent suspension for example ?

How much is S2? In your eyes?

Fmic-350
Turbo back exhaust 500-600
S2K filter-20
Bosch 110 Diverter Valve - 30
TIP - 120
Tune - 250-350

Not necessary but good

Phenolic spacer 70
SAI/N249 Removal 20
Spring mod wastegate 5
Oil Catch Can - 30

You have a Cupra R?

 

[Gokiwi64]

Rods needed for S2 - The BAM only has forged crank and pistons

I already have Air Filter/Oversize TIP
Bailey Diverter valve
Phenolic Spacer on inlet and throttle body
No SAI
N249 removed
Catch can
Uprated fuel pump

So missing exhaust & fmic , rods and dyno mapping

 

[lightup]

Uh my god thats expensove i got my Setup for 650 Euros with a 200cell 3"cat at the Very Ende of the downpipe.

which downpipe do you have? i cant find a decent one. need to find a cheap custom adres.

 

[Leon20vt4]

which downpipe do you have? i cant find a decent one. need to find a cheap custom adres.

Ahhhhhh my friend welcome to the 4x4 Leon world.... where nothing is easy to find and you have to look in multiple places. The one I have is RM motors, they are a good quality shop coming out of Poland. You need to be looking for Audi A3 1.8t Quattro, and Golf mk4 4motion 1.8t

 

[Leon20vt4]

https://rm-motors.pl/index.php?id_product=542&controller=product&id_lang=11

 

[lightup]

oh looks nice. but i need a cat though, still loads better as my first quoted price of €995.- for a custom downpipe with cat. which cell do you put on ? the catback looks nice too. the one on the complete exhaust of a cupra R awd. weird the only complete exhaust is of a cupra r in awd lol. https://rm-motors.pl/index.php?id_product=643&controller=product&id_lang=11

 

[Leon20vt4]

oh looks nice. but i need a cat though, still loads better as my first quoted price of €995.- for a custom downpipe with cat. which cell do you put on ? the catback looks nice too. the one on the complete exhaust of a cupra R awd. weird the only complete exhaust is of a cupra r in awd lol. https://rm-motors.pl/index.php?id_product=643&controller=product&id_lang=11

Because it's the same as the S3! Haha that's why! Do you have a Curpa R? 225 ?

 

[lightup]

Because it's the same as the S3! Haha that's why! Do you have a Curpa R? 225 ?

ah makes sense lol. but havent seen a oem cupra r awd yet. no i have 180bhp version. but 4x4.

 

[Gokiwi64]

RM don't seem to do one for the LCR 1M either :-(

 

[Leon20vt4]

RM don't seem to do one for the LCR 1M either :-(

I will call them and see what's up! Hypothetically the downpipe for the S3 should be the same or similar. And for the 4x4 1.8t they have a downpipe and the fatback from the s3 bolts right on. But again that's why I chose DM downpipe and Fox midpipe and custom muffler and rear exhaust. My style I dont like getting complete sets

 

[Leon20vt4]

I will report back here when I know more. Maybe I can get a list of what is avaliable for the 1m different models.

 

[Leon20vt4]

ah makes sense lol. but havent seen a oem cupra r awd yet. no i have 180bhp version. but 4x4.

There isn't one. Only 4x4 1m cupras are 1.8t , 2.8 and 2.8 supercharged. Also this topsport but that's no cupra

 

[lightup]

I will call them and see what's up! Hypothetically the downpipe for the S3 should be the same or similar. And for the 4x4 1.8t they have a downpipe and the fatback from the s3 bolts right on. But again that's why I chose DM downpipe and Fox midpipe and custom muffler and rear exhaust. My style I dont like getting complete sets

yeah you have ARY also dont you? yeah i jusy want the downpipe but i do want a cat. think i want to try to fot the miltek catback in the cupra r bumper.