Today my 2018 Leon FR 1.4TSi (150) DSG helped me pass an IAM driving assessment. Only real negative comment was regarding my tendancy to occasionally slightly exceed 20 & 30 limits.
 
  • Like
Reactions: Walone
mine had just gone aswel how much did it cost ?
Seat helped a lot, I forget the goodwill gesture name, but they covered 75% and only charged £80. I would have bought one from eBay and done it myself had they not

Sent from my VOG-L29 using Tapatalk
 
Gave a friend a lift during the storm last night, 140 miles on heavily sign-posted roads reminded me why I hate driving my Leon at night.
Lights perform extremely poor in the wet and the glare on signs is very dangerous. Had a car with very bright xenons and this was never an issue.

On the plus side, 49.7MPG @ 65MPH cruise control, running on E10 as my local didn't have any E5
 
Changed wheel colour to a grey-bronze colour (custom colour by KLC Wheel Refurbishment)
696A9FDD-A4EA-41E2-9973-29158CBD4FEA.jpeg

B102DA12-7C53-43AC-8E60-EA62FCB52A52.jpeg


Comparison against gunmetal grey
D2BC31F6-C2F7-4581-8FCD-39B071D9D544.jpeg
 
  • Like
Reactions: Wilto and Gaz9000
Anyone know where to get replacement windscreen washer jets? I want to get the mist style ones for the front as one side is knackered, so may as well do both.
 
Reiger front splitter fitted. Really is as easy as folk have said but getting a decent angle to photograph it isn't. With regards to the rear one, anyone know whether the standard tailpipes get a bit lost within it? I know some of you guys have gone bigger with rs3 style or twin twins but my intention is to leave the exhaust alone.

Cheers

20220226_162926.jpg
 
Kerbed my front passenger wheel today attending a callout, too much rain to properly assess the damage but so far a scuff and small piece of rubber. :mad:
 
  • Sad
Reactions: Walone
Kerbed my front passenger wheel today attending a callout, too much rain to properly assess the damage but so far a scuff and small piece of rubber. :mad:
Did the same thing on school run a while back. Small dink on an otherwise mint wheel and a chunk of the tyres rim protector hanging off. Spent the time carefully glueing the rubber back only to get an unrepairable puncture 2 weeks later anyway........
 
Did the same thing on school run a while back. Small dink on an otherwise mint wheel and a chunk of the tyres rim protector hanging off. Spent the time carefully glueing the rubber back only to get an unrepairable puncture 2 weeks later anyway........
Had a good look today, tyre should be fine just needs gluing back down. Hopefully I don't get a puncture in 2 weeks.

I also found the source of the gnome under my dash, the motor for controlling the blend door has skipped a cog. No idea how to fix so the clicking noise is here to stay ?