TDI 110, S3 recaros, PD150 turbo, Injectors, Remap, Coilovers and Cupra kit!

EB-80 · Sep 23, 2012

Hi everyone, I'm new on here and really like the site. Loads of info and helpful members so far.
As I've been asking for some tuning advice I thought I should stick some pics up of my chariot.

We've owned it since 06 and its been standard since about a week ago. 60K on the clock and no issues at all. Its been a great car which is why I dont want to let it go.

Now its my work car I couldn't leave it standard. I just dont do leaving things alone.

The day I first took it to work I fit B4's and 30mm lowering springs. I'll be changing for coilovers I think.

Then I changed the wheels for some copy BBS (cheap and look good imo), Removed rear interior ready for my cupra r interior coming, changed airbag in the steering wheel for a cupra one, fit cupra rear bumper and removed backbox and made an exhaust tip.

Still to fit I have Cupra sideskirts, VRS rear wiper and fit 312mm audi tt front breaks and MK4 288mm golf hubs.

I am hunting a complete Cupra R front bumper ATM!

Then the car will get the power sorted in whichever route I decide to take.

I'll update as and when I do more to it. Cheers guys [B)]

EB-80 · Sep 25, 2012

My Coilovers turned up today as did my interior. We were quiet so I fitted them.

The set up that came off is brand new Billy B4's and -35mm jamex springs that are all for sale if anyone is interested....

I'm happy with the ride height and feel. for cheap coilovers they feel great and i'm well happy.

Still need a cupra R front bumper and fit the sideskirts but we are defos getting there on looks front now. Oh and the discs are 312mm now ready for power upgrades.

EB-80 · Sep 26, 2012

I adjusted the ride height a bit more today. Lower obviously, no pics though.

I fitted my Audi TT 312mm discs and callipers while i was fitting the coilovers but am struggling to get a pedal.
Ive bled them twice now but theres defo still air in the system. Anyone had simular?

Also ordered and paid for a solid flywheel and sachs race clutch kit today. Whoop.

EB-80 · Sep 27, 2012

I've sorted the brakes out today. Just needed to bleed the M/C first then the calipers.

Bigger brakes do feel great now!

I've also retracked the car and set the ride height to where I'm happyish with it!

Pic's of the FK coilovers

And the car sitting how I want it

Next on the list is to fit the clutch I've order today and the cupra sideskirts I have waiting. Find a front bumper and colour code the door strips.

Then I will sort out the power increase.

Brettyboy · Sep 28, 2012

Looking good m8

Thats the ride height mine sitting at but coilovers will take a few wks to settle

EB-80 · Sep 29, 2012

Thanks mate.

I've Just sorted PD150 Turbo, intercooler, inlet manifold, and Airbox for peanuts. Just need injectors now. [B)]

Brettyboy · Sep 29, 2012

Be interested to find out the outcome of power gain

EB-80 · Oct 2, 2012

I've just walked out of Seat parts department alot lighter. At least I've fix the not being able to find a front bumper problem.

All my go faster bits should turn up today as well.

EB-80 · Oct 7, 2012

Right I haven't figured out the loom for these yet but got the lot out of the Audi. Once there fitted properly I'll post better pics.

All the seat are mint and the runners leather arm rest and runner cover came included. Oh and leather handbrake. [B)]

EB-80 · Oct 8, 2012

Well there in and they look great. These are soooo much better than standard seats.

Not the best pics cos of the sun but....

EB-80 · Oct 9, 2012

Today I got my front bumper back from the bodyshop. We put all the grills in etc.

I also marked up the sills and bonded the clips for the sideskirts on. They will be dry tomorrow so I will fit them tomorrow along with the bumper.

I'll post some pics of it fitted tomorrow incase anyone is arsed :lol:

EB-80 · Oct 15, 2012

I've made some good progress over the last couple of days.

Cupra R kit is fitted.

S3 seats wired in and treated.

http://s391.photobucket.com/albums/oo360/decca80/Leon Pics/?action=view&current=20121015_172956.jpg

They are so nice to sit in. I'm really happy with the cars looks inside and out. Well i will be once its properly finished.
This turned up today as well

Single mass flywheel and uprated VR6 friction plate clutch kit. My nozzles at with Ryan @ darkside ready for my trip down for the power upgrades.

Any questions or opinions welcome.. [B)]

Pimped up vario · Oct 19, 2012

Coming along nicely. Be interested in the power output. Nice look too. The mods and colour of the car work well together. Understated and swavue are the words I'm thinking of.

EB-80 · Oct 20, 2012

Pimped up vario said:
Coming along nicely. Be interested in the power output. Nice look too. The mods and colour of the car work well together. Understated and swavue are the words I'm thinking of.

Thanks mate.

Ryan at Darkside has sent my injectors back inside a week which is good turn around IMO.

.260 nozzles fitted

My PD150 snail is being hybrided now. Machined turbo housing to suit high flow wheel, 360 deg thrust bearing etc....

Then it down for a day at Darkside. I'm interested to see what she'll manage [B)]

EB-80 · Nov 3, 2012

Turbo's back!

57FE95D9-3035-41C4-A486-B180E31CAD81-12260-00000A1A20E73907.jpg

ED3BB70A-5B6F-423C-8CEE-018B962D4B3D-12260-00000A1A1D58A425.jpg

Fit this then it's off for a map to suit!

Pimped up vario · Nov 3, 2012

Who done the turbo work? If you don't mind me asking. Turbo should with supporting equipment should be good for 250 bhp. 220 bhp would be a good average. Although with standard compression ratio I personnally wouldn't want to go above 200 bhp. Are you going to fit an exhaust gas temperature gauge to keep an eye on the turbo health?

EB-80 · Nov 4, 2012

Exhaust gas temp gauge sounds like a good idea.

The turbo was done by a mate of a mate who works at turbo solutions in Darlington.

I'm going for 200bhp as its just my daily work chariot and don't want to blow it up every 5 mins.

Off to Dankside soon.

ibizaboi · Jun 4, 2013

looks awesome mate! I just bought a 110TDI so I will be watching closely

Search

TDI 110, S3 recaros, PD150 turbo, Injectors, Remap, Coilovers and Cupra kit!

EB-80

Active Member

EB-80

Active Member

EB-80

Active Member

EB-80

Active Member

Brettyboy

Active Member

EB-80

Active Member

Brettyboy

Active Member

EB-80

Active Member

EB-80

Active Member

EB-80

Active Member

EB-80

Active Member

EB-80

Active Member

Pimped up vario

Cordy Cruizer

EB-80

Active Member

EB-80

Active Member

Pimped up vario

Cordy Cruizer

EB-80

Active Member

ibizaboi

Active Member

Similar threads