sai

  1. SAI Relay?

    Hi, I have a longstanding battery drain issue for which I suspect the SAI circuit. If the SAI pump is left connected, battery discharges at least once a week. With the SAI pump disconnected, the issue did not occur for more than a year. (The battery drained again within days of reconnecting the...
  2. SAI Breather Filter

    Hiya all just a quicky, Got a jetex cone filter on the way and just realised i need a filter for the SAI system, please could a couple of you post a few links to where i could get a cheep one, at work all day so will just check back occasionally. All the best Ben
  3. N112, N249 and SAI

    I have seen on here people remove these vavles and by pass them just wondering if someone can tell me whatthey do? sorry if its already been covered 100 times over. thanks
  4. sai pump removal question

    hi all i am just wondering if the eml will come on because i have removed the sai pump even though the sai valve is still fitted? cheers
  5. greg

    Should SAI breather come from main intake or have seperate filter?

    I have a BMC (i think) induction kit on my cupra with a cold air feed from the front wing. The back of the filter goes through a 45 degree bend to the MAF. Plugged into this 45 degree bend is the breather pipe for the SAI system. I have noticed on some pictures that other people have the 45...
  6. EZ Tutty

    Keep Getting 16795 - SAI Incorrect Flow...

    Hey, I removed my SAI system approx a year ago and fitted a forge blanking plate and a 330ohm 10watt resistor in place of the pump (also did the N112 and N249 valves). In the the first 6-9 months i think i had the 16795 SAI Incorrect Flow Detected fault once. But just lately i've been...
  7. Removed SAI valve - what about these sensors?

    Hi, Just finished removing my SAI, was getting the incorrect air flow fault on vag com and an EML ! removed the valve and put in a plate. Havent cleared the fault on vag com yet but i'm hoping I wont get the anoying light anymore........ anyway, question is What shall I do with...
  8. GarryGti

    SAI Pump connecter

    I've removed the SAI. what do you do with the connecter that goes into the pump it has 2 wires on it. i've seen that you can put a resistor on it i've just cut mine off and left it with know faults coming up. What has everyone done with theres??
  9. N249 bypass and SAI removal.

    Alright guys, just wondering whats all this N249 bypass and SAI removal all about? Im currently running a standard 1.8T cupra appart from an air filter, what are theses mods used for and if i do it to mine will i notice any difference? Cheers
  10. SidewaysCupra

    SAI fault code

    Giving the car some welly in the snow today and the "check engine" light came up on the dash. Put the car on vag-com when I got home and it came up with: 16795 P0411 Secondary Air Injection System: Incorrect Flow Detected I have done a search and found that this is a pretty common...
  11. mitch2028

    SAI removal question and a few others!

    Hi all hope your having a nice christmas! :) Ive got a few problems at the minute with the car, ive used a forge blanking plate for the sai system but i was wondering what to do with the vacum hose that went to it? the obvious answer i thought would be to block it off as its not there...
  12. Damoegan

    Guide - Removing SAI, N249 & n112 valve

    Just removed my SAI, N249 & N112 valves today and thought I'd do a little guide :D What you will need: 330 ohm 10W resistors * 3 (from RS Components clicky) Vac/boost pipe - about 0.5m (from placed like Forge) Combi valve blanking plate (you can get them from Forge but I made mine...
  13. dubz_wm

    anyone in london area forN112 N249 and sai removal

    just wondering if there would be anyone in the london area that would be happy to do my bypasses on my car for me, not totally clued up on the jobs that need to be done( read about it loads of times 2) and im not very handy with a solder gun....:doh: any body? i wil purchase the resistors etc...
  14. SAI leading to boost problem

    i had a problem with my car losing boost. it would only boost properly when it wanted it was like this for about 4 - 5 weeks. After taking it to a few garages all saying they fixed it (including seat) it was still playing up. when it would stop boosting i would pull over an look at the...
  15. Crankcase ventilation, SAI + k03 inlet size!

    Right guys, after a bit of help knocking some questions out! Ive put my AYP engine into my mk1 golf and have it idling but ive come up with a few issues. I have no inlet hose to my turbo, only the metal inlet elbow which is a pretty poor design. Ideally i want to get a 90 elbow going to...
  16. ttothec

    N211, N249 & SAI Bypass error code

    ive bypassed N211, N249 and SAI with only vacuum hoses, so everything is still electronically connected (all clutter still on rocker cover and SAI still in place, all vacuum pipes not used are blocked off and P007 vacuum goes directly to inlet manifold) the car drives perfectly, but i did a...
  17. SAI removal 330ohm 10watt resistor

    Anybody know where I can get one of these in the UK? I believe this is the one I need to fool the ECU so it does not bring up a code. I have the plate already from the USA but the resistor was silly money. There was a link somewhere to a UK place that did them but I cant find it now which is...
Nimbus hosting - Based solely in the UK.