5 stud hub conversion

[kieran_cupra]

Was just wondering who makes a 5 stud hub conversion for the mk3's as im bidding on a set of audi tt competion wheels which im getting powercoated black.

just need to find the hub kits.

Kieran

 

[C3 LJG]

If they are 5x100 just get some hub adaptors from venom or one of the other companies that sell them.

 

[Icecavern]

I have a set of Mk3 Golf VR6 hubs you could use...

 

[ibizacupra]

offsets going to allow the TT rims to fit with adaptors?

 

[kieran_cupra]

hmmm im not 2 sure ill have a look, saw these wheels on a mk 3 golf 1.8 gti last nite with a 5 stud conversion and it looked spot on

i want them


kieran

 

[m0rk]

but you don't have a mk3 golf?? the arches are more suitable to modification to clear

plus all the parts are available easily off the shelf to do a proper conversion rather than bodge it spacers.

to do the job right will probably cost more than the wheels.

 

[ibizacupra]

5x100 drive flanges perhaps as alternative for front. not sure about rear tho from what 5x100 same type hub is the same/similar

 

[m0rk]

would have to use mk3 golf stubs, discs & bearings I would think

 

[kieran_cupra]

what about cupraT he had porcshe wheels on his???

Kieran

 

[roly]

MK1 Toledo 2.0 16V uses 5x100 PCD if your looking at a full 5 stud coversion

 

[ibizacupra]

MK1 Toledo 2.0 16V uses 5x100 PCD if your looking at a full 5 stud coversion

I did'nt know that,
cheers Roly.

 

[kieran_cupra]

they run discs on the rear???

any 1 got a set lol, still bidding on these wheels so want t be sure

Kieran

 

[roly]

not sure why it was only 16v that used them but i looked into doing the same when i had my MK3 Cupra

front discs are 280x22 and rear discs are 226x10

difference with rears is that they use same style wheel bearing as the MK2 ibiza not a sealed unit like the MK3 so you would have to change rear stub axles if you wanted to use them on the back

 

[beattie17]

Whats all needed to do front 5 stud conversion?

 

[roly]

from memory just hubs, bearing and discs

i think calipers are the same and so are the bearing carriers

 

[beattie17]

So how much you recon it would cost?

 

[roly]

i'll try look some prices up at work