ABS loom issue

[Cupra_Josh]

Hi guys I’ve got an abs issue on my mk1, 52 plate Leon cupra, looks like both front abs looms have been worn through and spliced back together but not used heat shrink and waters got in and corroded the wires, abs keep’s pulsing under braking and its driving me nuts to say the least, where dose the loom go to after the chassis and has anyone had this issue and successfully fixed it or dose anyone know any auto electricians near Lincolnshire or Staffordshire that would be able to sort it. thanks in advance.

 

[MoToJoJo]

If you mean the front wheel speed sensors, they go to the ABS pump (they're bundled in the rest of the wiring loom but that's where they end up)

 

[Thai-wronghorse]

Inbox me if you want a pair sent out.

Sent from my SM-S906B using Tapatalk

 

[Cupra_Josh]

If you mean the front wheel speed sensors, they go to the ABS pump (they're bundled in the rest of the wiring loom but that's where they end up)

Ahhh thank you buddy

 

[Cupra_Josh]

Ahhh thank you buddy

Also when coming to replacing the wires would I need to re pin it to help lower the risk of adding resistance