advice!! Colivovers or ????

[james walker]

im going for these in lcr fitment i think.

fit with r32 arb should make a bid difference.

 

[Rocky Rocastle]

which ones James?....weitecs as i know you mentioned JOMS the other day.

 

[james walker]

yeah weitecs now. -50mm, the joms dont have lcr fitment.

fancy going the r32 uprated arb acting on the shocks as an upgrade rather than an uprated lc one acting on the wishbones, to fine tune my handling setup.

 

[lordgibbness]

fancy going the r32 uprated arb acting on the shocks as an upgrade rather than an uprated lc one acting on the wishbones, to fine tune my handling setup.

Are you also uprating your 22mm rear ARB out of interest James?

 

[james walker]

probably leave it mate, its set on 3rd level of stiffness and feels very good as it is.

did think about selling it and going 25mm rear, but not sure it would make much differnce as its stiff as it is

 

[lordgibbness]

Be interesting to hear your findings as the front to rear balance will be affected - you'll have to let us know!

I'm currently thinking of a 22mm front and 25mm rear setup (don't want to go too stiff with ARBs).

 

[james walker]

the front arb on lc is 23mm juxt now and rear 22m adjustable... no imbalance.. feels very good

 

[lordgibbness]

Yep, don't doubt it - but as you say a change in where the ARB connects to the suspension will change the effective stiffness of it.

 

[james walker]

yeah, what i was thinking mate....

probably go for 25mm eibach and sell the whiteline.

you know if the r32 will go on with lcr shocks and droplinks onto the cupra ok... subframe, wishbones etc etc

 

[lordgibbness]

Let us know your findings as its still a few months before I buy my ARBs