Anyone gone AM04 yet? Just trying to find out exactly what I need to fit / run the conversion. What the car currently has is listed in my sig. below, presume I need the turbo, manifold, injectors... anything else?
The K04-001 wasnt reliable but I thought the point of the K04 hybrids (AM04/JBS04 etc) were that they were a reliable replacement for those wanting a bit more than a K03s could give?
Addo
Guest
t18con said:
Hows that?
We've beening running it hard for just over 20,000 miles now with various track days etc......
not an ounce of trouble are you thinking of the E05's out of the 3 i no of 2 blow up.
NOT THE AM04!
how much do the AO4's go for? and what kinda benefits do they offer over the KO3s? (C'mon sell it to me..) lol
Addo
Guest
helms said:
We are currently developing the AM04 with some new modifications. Mike has the modified version on his ibiza now, but we need to get a tweak with the map @ Jabba's to adjust peramiters.
The AM04's are ready but the kit will come with our new big port manifold and will fit onto you standard exhaust system, An intercooler is essential and 3" downpipe highly recommended.
Shock_Xe
Guest
David_smith_909 said:
we use Blueflame and they give good discount give them a ring and say we refferd u
Shock_Xe
Guest
Shock_Xe
Guest
Aye E05 was a bit un-reliable, I know Gav (Zippy's) went pop... Can't remember if it was Gary or Jool's old turbo.
Shock_Xe
Guest
Craig! said:
it was jool's turbo cause we supplied gary with K03s early on in the E05's life then supplied Gav with K03s not long after he bought it off jools
since when was reliability an issue for modifying ?
all about pushing the limits
sorry - stripping a motor as we speak that managed 3 miles - but didnt half go at the time
all about pushing the limits
sorry - stripping a motor as we speak that managed 3 miles - but didnt half go at the time
Shock_Xe
Guest
helms said:
basically the AM04 boasts benefits in an upgrade the same as a K03s compared to k03, but the benefits are from k03s-am04 so basically double the benefit if u go k03-am04 and then some
the compressor housing is larger than K03s, Larger Exhaust wheel, larger compressor, larger inlet, Ported/flown exhaust housing etc etc, If you only have a K03 fitted the benefits are even higher as its the same jump above again as the K03s boasts these benefits over a K03 but not as larger scale
But u get to keep stock fitting/appearence
Shock_Xe
Guest
As Adam said the Turbo has been fitted and running now for 18mths and 20k+ has seen fast driving and high boost 25-27psi peak at times and still going storng. When I put the New Manni/Flown/Ported housing down we stripped the turbo down and had it proffessionally inspected, the report was very positive with no defects to found
Shock_Xe
Guest
K03s (Left) vs AM04 (right) the diff between K03 and AM04 are 2x bigger than this picture
Dyno on stage 1 turbo and stock mannifold running large core (above) and 25psi peak, 23psi hold (Jabbas NEW Rollers)
Hoping Large Bore Manni and flown/Ported Housing will deliver better results
Note dyno shows 2x Hot Runs and 2x Cool Runs
Its nice to have 240bhp at 7200rpm at 6800rpm it shows 245-250bhp
Torque comes in fairly early but is laggier than K03 but for the little bit extra lag (500rpm) you get alot more top end, strill lights wheels up in first two gears and 3rd in wet
Dyno on stage 1 turbo and stock mannifold running large core (above) and 25psi peak, 23psi hold (Jabbas NEW Rollers)
Hoping Large Bore Manni and flown/Ported Housing will deliver better results
Note dyno shows 2x Hot Runs and 2x Cool Runs
Its nice to have 240bhp at 7200rpm
at 6800rpm it shows 245-250bhpTorque comes in fairly early but is laggier than K03 but for the little bit extra lag (500rpm) you get alot more top end, strill lights wheels up in first two gears and 3rd in wet
Last edited by a moderator:
so there's a very noticable gain post 5000 rpm over ko3s? im peaking 20 and loosing 7 psi to the red line with my ko3s.
Similar threads
