bailey dv30 and forge 007p

[Lodgey180]

is there much difference in the sound ??

 

[kineticz]

I've heard the DV30 is meant to be louder.

 

[motty225]

ive heard the same, DV30 is ment to be louder but cant be sure due to olny testing the 007

 

[Lodgey180]

i have dv30 back on but obv i dont know what 007p sounds like..

thanks for the replys

 

[motty225]

check youtube mate there are quite a few clips of them

 

[Ruddmeister]

As an aside I had a Bailey DV30 which I couldn't service, it lasted 12 months, diaphram broke and ended up binned (£100 ish down the drain)

Replaced with a 007p which was more reliable

 

[Lodgey180]

As an aside I had a Bailey DV30 which I couldn't service, it lasted 12 months, diaphram broke and ended up binned (£100 ish down the drain)

Replaced with a 007p which was more reliable

what did you make of the sounds.. bailey will service the valve for £35 i think it is

 

[traumapat]

ive run both and couldnt really remember a sound difference. so if it was louder it wasn`t by much,

there have been a few people experiencing problems with the newer baileys sticking when hot so ive heard

 

[Ruddmeister]

ive run both and couldnt really remember a sound difference. so if it was louder it wasn`t by much,

What he said.......maybe the Bailey was slightly louder.......not much in it

If you want 'loud' what about the Forge Split-R?

 

[MrJohnnyB]

Best mod if you want to hear the DV is defo a induction kit, can hear my standard dv quite well now I've fitted a CAI kit.

 

[Lodgey180]

to be honest ive tried loads of bovs, dvs .. had a dv26 on for a while but caused problems.. ive had a split r and that caused problems so im in 2 minds to just get a 007p just so i know its not going to fail.
ive got a big ramair filter on so im still getting noise i just wondered what everyone thought .
it seems that even though its mechanicl different valves make the car drive differently

 

[Damoegan]

I have 2 DV30's sotting in the loft. First one started sticking once the car got hot so I sent it off to Bailey to refurb it, done the same thing when I got it back. So they sent me a new one, but it done the same too. Only way I could get them to work properly was to run them upside down boost into the bottom).

Now running a Forge 007P, such a better valve IMO. Sound is nearly identical. If you want more noise fit a open cone filter.

 

[Gubien]

I've changed from a dv30 to a 007 14 days ago. There isnt much difference, but the dv30 is louder