Bmc

[Rossi 46]

Whats the part number for a BMC CDA for a Mk3 Ibiza Cupra?
Also other than BMC direct where can you get them from?
Sorry if this has been posted before but couldn't find anything overly relevant by searching.
Ta.

 

[Beaker™]

http://www.bmcairfilters.com/VisDetail.asp?ID=209

 

[SEATCOOBER]

mine is ACCDA85-150

 

[Beaker™]

mine is ACCDA85-150

Yours is off a 2.0 16v

 

[SEATCOOBER]

is it wrong then?

 

[Beaker™]

I don't know, probably not much difference anyway. I'm only going by what the BMC website says, so who knows.

 

[Beaker™]

By the looks of it the CDA85-150 is also for mk3 Golfs, Peugeot 306, Nissan Pulsar, Punto and many others. Its suggested to be used on anything over 1600cc so i'm sure it's fine.

Heres a list of numbers and applications.....

http://www.non-stop.no/TEMPLATE/NONSTOP/STATIC/PDF/Cars/BMC CDA.pdf

 

[SEATCOOBER]

i got one before ,but had massive fitmet issues it was to big so went for a shorter one

 

[TTS Roadsport]

BMC are wrong. They have been told, but they still seem to think its the SP-02. Due to the size of the SP-02 and the fact its for the larger MAF, it will not fit the Ibiza.

Go for the CDA85-150. Its still a pain to fit tho and you will need a small silicon elbow.

 

[Beaker™]

Strange. Well i'm not sure what mine is but i know i have no elbow, mine fits straight on. Granted it may look neater with an elbow but you don't need one.

 

[TTS Roadsport]

Looks like an SP-05. Its it quite close to the battery and the cooland bottle and did you get a cold air feed on?

You really should get yourself a nice TIP.

 

[Beaker™]

Looks like an SP-05. Its it quite close to the battery and the cooland bottle and did you get a cold air feed on?

You really should get yourself a nice TIP.

Cold air feed fits fine yeah, TIP will be coming along with K03s

 

[SEATCOOBER]

here is mine looks loads shorter than yours with elbow 2?

 

[Beaker™]

Is the part number marked on them anywhere? If not, i'll measure the length of mine next time i'm outside and remember.

 

[SEATCOOBER]

ive still got the box, and is marked as ive said above, ive also added abit of 45 degree drainpipe to mine so a pipe can go into the wing on the other side

 

[Adam R]

ive still got the box, and is marked as ive said above, ive also added abit of 45 degree drainpipe to mine so a pipe can go into the wing on the other side

how much did that cost you ?

im wanting a new induction kit for my 1.4 (i know its only a 1.4 but the standard induction is badly designed). would the BMC work with my engine or would i need something smaller ?

 

[SEATCOOBER]

i have no idea mate if it is compatable with your car the inlet is three inch so if yours is that big then it will fit but if not just pack it with smaller cilicone pipe, i dont have this on anymore anyway cos i have fitted a catch tank behind the battery so the bmc induction is too big so i have a little filter on it now!!!

 

[Adam R]

i have no idea mate if it is compatable with your car the inlet is three inch so if yours is that big then it will fit but if not just pack it with smaller cilicone pipe, i dont have this on anymore anyway cos i have fitted a catch tank behind the battery so the bmc induction is too big so i have a little filter on it now!!!

pipe size is no problem as long as it is bigger than my TB. anything can be done with a bit of carefull work. im just trying to find a decent air filter and a good price that will replace the awfull design on the standard air box.

 

[ttothec]

ive still got the box, and is marked as ive said above, ive also added abit of 45 degree drainpipe to mine so a pipe can go into the wing on the other side

so which one do u have??

CDASP-02 (1.8 T 20V CUPRA)

or

CDA85-150 (2.0 16V)

and what size and angle is ur elbow??

 

[Beaker™]

so which one do u have??

CDASP-02 (1.8 T 20V CUPRA)

or

CDA85-150 (2.0 16V)

and what size and angle is ur elbow??

mine is ACCDA85-150

CDA85-150 by the looks.