Camber Kit

[devilChris]

does the camber kit exist?
I don't succeed in finding it.
can you insert some links? photo? and other ?

thanks

 

[m0rk]

like these? http://www.h2sport.com/products.php?productid=2

 

[devilChris]

oooo thanks...

I hope it sends in Italy...

this kit go well with any coilover ?

 

[m0rk]

it will stop you getting too much negative camber when you lower it, so it's a good idea

I think there are other options though - that was the first I found on google

 

[devilChris]

I have looked for on google, but I have not found anything

but it comes me a doubt...

it is not possible to regulate the camber in the inferior trapeze (the arm of the wheel)? do kits exist?

 

[m0rk]

you cannot change it at the 'wheel' end because it is fixed solid.

 

[devilChris]

ok...

this kit is for front camber..... rear ???

 

[devilChris]

I have found these:

www.autocarparts.com/part/list/932/

www.ground-control-store.com/products/description.php/II=653/CA=88

www.neuspeed.com/products/product_details.asp?app=4|TT&type=2&ltype=ns_euro&p_id=2050

www.gmpperformance.com/index.cfm?PG=byVehicle_list_parts&CID=5434

but only for VW and audi... never seat
is necessary to inquire on compatibility with leon cupra

 

[robepton]

What about these!

http://www.venommotorsport.com/manu...on&product=FrontCSMounts&make=Seat&model=Leon

There part of the KW clubsport range and you can buy them seperately.

 

[Willie]

The camber is adjustable on the front end of the LCR as it has the same swing arms as the S£ and 2WDTT. The ball joints are slotted into the swing arms allowing you to remove negative camber on lowering. The factory camber is -0.5 degrees. 034 do a camber kit combined with a strutt brace to give you a max of -1.8 degrees which is quite a bit. The Race spec LCR's run -3.5 Degrees on the front and -2.5 degrees on the rear.

 

[ibizacupra]

the race spec leans dont run the same front hubs at all tho, theirs are fabricated items, totally different

 

[Willie]

Yup as Bill says these race LCR's are a very different spec but thought it was interesting to see how they were set up.

 

[devilChris]

I have contacted D2 MOTORSPORTs, but they don't make coilover with the regulation of camber.
in the model for the cupra r there is not the Top Mounts. strange.

I have also contacted Kw and they say that in the CLUBSPORTs for the leon cupra r there is the Top Mounts..

I must also buy some coilovers therefore I could buy the CLUBSPORTs...

 

[Willie]

If you bought the club sports you would be sorted for life, a very very good system that I would love to get my hands on.
This set up and corner weighted should be fantastic

 

[devilChris]

ok... but for rear camber ???
kw have only front top mount....

 

[ibizacupra]

shim kits for the stubs for rear adjustment for camber + toe

 

[devilChris]

is "shim" a user of the SEATCupra.net?

 

[Willie]

Shims are small pieces of metal to space out the rear to give fine control over the camber settings

 

[devilChris]

ok... excuse me, I am Italian, my English sometimes has some hole.

 

[devilChris]

for rear...

http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=260301CHAS&product=FMAUTB2