diagnostics results

[vngtx]

i ran diagnostics on my 2.0 8v yesterday and came up with these faults, does anybody know how to fix them?

01247 : activated charcoal filter system solenoid valve 1 - N80 (open short circuit to positive)

00515 : hall sender - G40 (sporadic: signal outside tolerance)

00523: intake air temperature sender - G42 (open circuit to positive)
00523: intake air temperature sender - G42 (open circuit to earth)

00520: air mass/ flow meter - G70/G19 (sporadic, open short circuit to earth)

i can probably work out that the air temp singal is lost because part of the wiring is cut and there is no temp sensor attached (thanks very much previous owner ) and the wiring was touching. the rest im unsure about.

 

[burnsy_b]

your charcoal filter system AKA EVAPERATIVE EMISSIONS SYSTEM selenoid is rather jamming or nackered. easy to fit should be able to manage yourself. dont imagine it will be to exspensive from SEAT neither.

id also go for an airflow metre aswell,

 

[vngtx]

where is the EEMSS or n80?