Doing internals...

[steevie wonder]

Hi,

Need some advice.....

I have got my scat rods and 83mm JE pistons ready for my bottom end rebuild, in addition to this I'm getting the head ported and flowed and replacing the valves with new nitrade/inconel oversized ones with new sleeves and guides etc. I have new OEM head gasket, but do I need anything else? i.e. new head bolts?

Any help would be great!!

Cheers,

Steve

 

[h17och]

stem seals and head bolts. or raceware studs

 

[B3LSY]

i might be having a bottom end rebuild as the small ends may have gone,how much were you rods an pistons?

 

[HTC]

Might need new guides.

 

[B3LSY]

how much are they?

 

[Cupra20]

i might be having a bottom end rebuild as the small ends may have gone,how much were you rods an pistons?

I'm pretty sure you can get rods for about £350 and JE pistons are £450-500 depending on bore etc.

 

[HTC]

Guides are cheap. Get supertech ones as they actually fit unlike other brands. I'd get them anyway as you may need exahust guides and would save waiting when it's appart. If you don't use them, sell them on ebay or on here.