Door won't lock 00928

[MooRzy]

Had a couple of faults come up on my scanner and I was having trouble with the car unlocking itself and putting all the windows down. I took the locking module off and had a look inside, there was a fair bit of moisture build up but nothing drastic, put it all back together and now the door won't lock, and I am getting the fault code 00928 ?

Anyone shed some light ? An I being daft ?

 

[MooRzy]

I can hear the door alparently locking but it doesn't actually lock ?!

 

[LEE69]

00928 - Locking Module for Central Locking; Front Driver Side (F220)

00928 - Locking Module for Central Locking; Front Driver Side (F220): Implausible Signal
Possible Symptoms
Door Locks not working properly
Possible Causes
Wiring/Connectors from/to Locking Module for Central Locking; Front Driver Side (F220) faulty
Voltage Supply for Locking Module for Central Locking; Front Driver Side (F220) faulty
Door Lock Mechanics are stiff/partially seized
Locking Module for Central Locking; Front Driver Side (F220) faulty
Possible Solutions
Check Wiring/Connectors from/to Locking Module for Central Locking; Front Driver Side (F220)
Check Voltage Supply for Locking Module for Central Locking; Front Driver Side (F220)
Check Door Lock Mechanics/Operation
Check Locking Module for Central Locking; Front Driver Side (F220)

00928 - Locking Module for Central Locking; Front Driver Side (F220): Incorrectly Equipped
Possible Symptoms
Door Locks not working properly
Possible Causes
Incorrect Door Lock installed
Possible Solutions
Check Locking Module for Central Locking; Front Driver Side (F220)
Check Door Lock Part Number
Special Notes
NAR (North American Region) Models do NOT have a SAFE-Switch in their door locks, once these models are being wrongly equipped with a RoW (Rest of World) door lock, a SAFE feedback signal is being sent which causes this code.

 

[LEE69]

new door lock is £40 of ebay

 

[MooRzy]

Do I just get a new lock ? I did look at the soldering inside the module and it looked fine. Micro switches clicked fine. Would a new module just be easier ?

 

[LEE69]

For the sake of £40 i wouldn't be messing about

 

[MooRzy]

In the picture , there is a metal pin which is hooked into the gold hook. Everytme I use the handle this pops off ? We're is it meant to be ?

 

[LEE69]

No idea sorry

 

[LEE69]

ok i just got a lock out the shed give me 2 secs and i''ll take a picture

 

[MooRzy]

Who keeps spare door locks in the shed ! Haha

 

[LEE69]

 

[LEE69]

Who keeps spare door locks in the shed ! Haha

lol i was sent it ages to see if it can be fixed

 

[MooRzy]

Haha okay. I can't see what it does ? Ont think that would be why my door won't lock ? Also I have broken this piece

What is this for ? Can't figure out what it does ?

 

[LEE69]

That's just an extra support for the lock, i binned mine lol

 

[MooRzy]

That's okay then, thought it didn't look important.

Do you rekon it would be worth disconnecting the battery to reset everything ? See if the door will fix itself ?

 

[LEE69]

Yeah you can try also connect the neg to the positive leads when off the battery, discharges the system of all power it's safe to do this.

 

[MooRzy]

Tried but no change. I will just order a new module, any recommendations for which one to buy off eBay ? There are lots for sale.

Thanks

 

[LEE69]

As long as the part number matches

 

[MooRzy]

3b1837016a ?

 

[LEE69]

yeah