My Ateca didn't come with the double floor and I need a level boot without any lip. Does anybody know where this can be purchased other than the dealer. Also has anybody fitted one themselves and if so how difficult was ?
Saying that many parts can't be ordered and I think the issue is that the side mounts are missing on the left and right where this has come up in discussion. That's probably another Ekta page and something that cant be ordered unless this is freed up now.
Some people have built their own mods to either lift the boot floor for 4 Drive by 2" or so or put a new one in made of plywood covered in carpet where a double boot wasn't specified, blocks of wood to rest on the sides etc. I think you have been pointed to that one elsewhere.
Basically you are stuck with whatever you ordered for the boot unless you engage in DIY. Spare wheel, that's the Leon one but again the tool kit may not fit nicely away for the 4Drive but fine for the 2Drive. Ekta shows the plastic mouldings that come with a factory fitted spare.
The parts site is a bit idiosyncratic so was probably playing up. This is the top page for the Ateca and you work your way down in body and they are off that.
Thanks for the info Tell but I have decided to make my own cover out of plywood looks simple enough with the side supports as detailed by another owner. I will keep you posted.
Just out of interest are the part numbers for a Skoda Karok the same (and does it fit!) as they list it as a £180 optional extra which is cheaper than Seat I believe?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.