dump valve

[Steve:LCR]

thinking of fitting a dump valve. has anyone got advice on which one to get?

 

[sambryant]

forge 007p, its bulletproof

 

[cupra_mike]

forge split r

 

[rk696]

Compbrake one. It's identical to the forge but a lot cheaper.

 

[rk696]

Make sure you get a recirculating diverter valve though. Dump valves as used on Cossies and scoobs etc upset the engine management on the 1.8t

 

[Pyro]

Forge 007

 

[Dvella]

me myself got a forge split r one... can't complain about it

 

[Steve:LCR]

thanks ppz. gonna get a split r. how much did you pay?

 

[TammyTroot]

what is the difference in performance between the forge 007 and the splitter version except it makin a woosh? are there any advantages over the splitter than the 007? The awesome version is that also made by forge??

 

[Mo Arif]

No difference in performance, just noise difference, the 007p is FULL recirculating, the split r is 50/50 and can be adjusting to half-recirculating / quarter-recirculating and thus creates a louder noise

 

[sambryant]

for performance the 007 is better as the fueling will be spot on. with the split r it leaks air (woosh) and will effect the fueling. also with the split r some ecu's hate them and will put them into limp mode.

 

[Steve:LCR]

split r can give 5-7bhp maybe the 007 is less? im not sure mate

 

[Mo Arif]

for performance the 007 is better as the fueling will be spot on. with the split r it leaks air (woosh) and will effect the fueling. also with the split r some ecu's hate them and will put them into limp mode.

Correct

 

[sambryant]

Correct

lucky guess

 

[Steve:LCR]

ok im again not sure which dv to buy

 

[Mo Arif]

to be on the safe side, 007p

 

[RDS]

Anything recirculating Forge 007P or Baileys DV30 will do the job nicely.

 

[sambryant]

my 007p with my badger5 tip and jetex cone filter is louder than any split r valve, plus no limp mode so im happy.

 

[TammyTroot]

im plannin on buyin 1 of the forge valves in the next couple o days, goin to fit it along with the bmc cda induction kit and forge t.i.p but jst not to decided on what valve yet??

 

[Steve:LCR]

cheers mate, and also on the plus side.. its cheaper than the splitr