-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
312mmx25mm discs
custom carriers and carrier bolts
vag to brembo braided brake lines
calipers...pads, pad shims, pad pin and spring with clip
thats about it.. wat car they going on, bear in mind wheel clearence for the porsche brembos aswell.
custom carriers and carrier bolts
vag to brembo braided brake lines
calipers...pads, pad shims, pad pin and spring with clip
thats about it.. wat car they going on, bear in mind wheel clearence for the porsche brembos aswell.
careful of fitment, are they rear boxster s calipers?
carriers from daveb1970 off here, hoses from badger 5... carriers are 130quid and hoses 50quid
carriers from daveb1970 off here, hoses from badger 5... carriers are 130quid and hoses 50quid
if you want new parts then your looking at £1200ish to put together your own kit with porsche calipers being the most expensive part (theres a porsche spares website that sell the exact calipers, new for £400 each), i priced up the job last month but never went through with it, you can buy kits from the likes of awesome for £800 but they dont come with pads.
As for the full job done for £500, you might have done yours for £500 mate but that doesnt nessesarily mean eveyone can.
As for the full job done for £500, you might have done yours for £500 mate but that doesnt nessesarily mean eveyone can.
No worries mate, i didnt mean to piss on anyones chips but when i priced up all new bits last month the prices were something along these line:
calipers (porsche genuine) £400 x 2
Carriers & hoses £200 (from awesome)
Discs (312mm drilled & grooved) £100
Pads £94 (carbon composite performance items)
Dot 5.1 fluid £12 (for 1litre)
And if buying from ebay do a search on here for the exact calipers you need so you can cross reference the part numbers and as james walker has said be careful fitment wise if you cant find the numbers because its rear calipers you need.
Last edited:
996.352.421
996.352.422
there the numbers you need, carrera or boxster s rears
312mmx25mm discs fit fine.
calipers used for 300quid
lines 50quid
carriers 130quid
shims 30quid
discs, you may have already but plain ebc for 60quid
fluid a tenner so all in for 550-600 bargain
996.352.422
there the numbers you need, carrera or boxster s rears
312mmx25mm discs fit fine.
calipers used for 300quid
lines 50quid
carriers 130quid
shims 30quid
discs, you may have already but plain ebc for 60quid
fluid a tenner so all in for 550-600 bargain
£500-600 is a bargain mate, it was the price of the new calipers that frightened me
However i think that if i go hybrid next year i'll run a cupra R off the road and steal there's
However i think that if i go hybrid next year i'll run a cupra R off the road and steal there's
Last edited:
£500-600 is a bargain mate, it was the price of the new calipers that frightened me
However i think that if i go hybrid next year i'll run a cupra R off the road and steal there's
Then sell me the engine
Theres a set of brembos on ebay now..
http://cgi.ebay.co.uk/SEAT-LEON-CUP...arts_Vehicles_CarParts_SM?hash=item3ca7640783
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160378639444&ssPageName=STRK:MEWAX:IT
Are these the adaptors to use ?? .. also where do i get the hoses for 50 quid ??
Are these the adaptors to use ?? .. also where do i get the hoses for 50 quid ??
Yeh they dont look like brembo ones though, look like remanufactured. Hoses, James said Bill does them so drop him a PM or post in his section Badger5 and his username is Ibizacupra.
they are the right carriers yes in the ebay link. same as what i have
youll pickup the porsche setup cheaper thn the oem vag brembos anyway.
does the fr have 312mm discs, think it does, is it petrol? if diesel think they have 288mm discs
youll need oem 312mmx25mm discs to fit.
youll pickup the porsche setup cheaper thn the oem vag brembos anyway.
does the fr have 312mm discs, think it does, is it petrol? if diesel think they have 288mm discs
youll need oem 312mmx25mm discs to fit.
Similar threads
