help plz. heaters

G223

Active Member
Dec 6, 2007
303
0
I'd check and make sure that the pump you got is right, motorfactors have a great job of f-ing things up, best to make sure you can get to the motorfactors without your car before you start working, then you can say i need this its for a -------- it should be the same as this, i got this one off you earlier its the wrong one....... at my local motorfactors its a good 3 runs to there and back before its the right part, Id say their useless but id be insulting useless people then.
 
Jun 28, 2001
1,533
0
start from cold fill the system up all the way start the car with the cap off make sure that fluid is flowing through the return after a bout 5 minutes put the cap back on(but top the level over the max mark by about 1 inch) then wait for the fan to kick in, let the fan go off turn off the car wait 5-10 minutes and re top up the level..
JUST REMEMBER THE COOLING SYSTEM IS PRESSURISED AND HOT. BE CAREFULL
 

richy_t

Active Member
Dec 9, 2007
86
0
yer i no what u meen i ge it all the time. i have other transport if it is the wrong 1.
 

G223

Active Member
Dec 6, 2007
303
0
Also Replica parts often look slightly different so dont worry, aslong as it lines up with everyhting and fits correctly i wouldnt worry too much